Netgear XCM89UP Web Management User Guide - Page 340
IGMP Routing Interface Configuration, Query Max Response Time
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
M6100 Web Management User Guide IGMP Global Configuration 1. In the Admin Mode field, select the Enable or Disable option. This sets the administrative status of IGMP in the router to active or inactive. The default is disable. 2. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. IGMP Routing Interface Configuration To display the Multicast IGMP Routing Interface Configuration page, click Routing Multicast IGMP Routing Interface Configuration. The following page is displayed. IGMP Routing Interface Configuration 1. In the Go To Interface field, enter the interface in unit/slot/port format and click Go. The entry corresponding to the specified interface is selected. 2. Select the check box beside the interface for which data is to be displayed or configured. 3. In the Admin Mode field, select the Enable or Disable option to set the administrative status of IGMP on the selected routing interface. The default is disable. 4. In the Version field, enter the version of IGMP you want to configure for the selected interface. Valid values are 1 to 3. The default value is 3. This field is configurable only when IGMP Interface mode is enabled. 5. In the Robustness field, enter the robustness value. This variable allows tuning for the expected packet loss on a subnet. If you expect the subnet to be lossy, you should enter a higher number for this parameter. IGMP is robust to (robustness variable-1) packet losses. Valid values are 1 to 255. The default value is 2. 6. In the Query Interval field, enter the frequency in seconds at which IGMP host-query packets are to be transmitted on this interface. Valid values are 1 to 3600. The default value is 125. 7. In the Query Max Response Time field, enter the maximum query response time, in tenths of a second, to be advertised in IGMPv2 queries on this interface. The default value is 100. Valid values are 0 to 255. 8. In the Startup Query Interval field, enter the number of seconds between the transmission of startup queries on the selected interface. Valid values are 1 to 300. The default value is 31. Routing 340