Netgear XCM89UP Web Management User Guide - Page 408

M6100 Web Management User Guide 1. List Name - If you are creating a new enable list, enter the name you want to assign. It can be up to 15 alphanumeric characters long and is not case sensitive. 2. Use the menu to select the method that should appear first in the selected authentication enable list. The options are: • Enable- the privileged EXEC password will be used for authentication. • Line- the line password will be used for authentication. • None- the user will not be authenticated. • RADIUS- the user's name and password will be authenticated using the RADIUS server instead of local server. • TACACS- the user's name and password will be authenticated using the TACACS server. • Deny- authentication always fails. 3. Use the menu to select the method, if any, that should appear second in the selected authentication enable list. This is the method that will be used if the first method times out. If you select a method that does not time out as the second method, the third method will not be tried. Note that this parameter will not appear when you first create a new login list. 4. Use the menu to select the method, if any, that should appear third in the selected authentication enable list. If you select a method that does not time out as the third method, the fourth method will not be tried. 5. Use the menu to select the method, if any, that should appear fourth in the selected authentication enable list. If you select a method that does not time out as the fourth method, the fifth method will not be tried. 6. Use the menu to select the method, if any, that should appear fifth in the selected authentication enable list. 7. Click Add to add a new login list to the switch. 8. Click Delete to remove the selected authentication enable list from the configuration. You can only use this button if you have Read/Write access. The change will not be retained across a power cycle unless you perform a save. Dot1x Authentication List You use this page to configure a dot1x list. A dot1x list specifies the authentication method(s) you want to use to validate port access for the users associated with the list. Only one dot1x method can be supported. The default list is: dot1xList. To display the Dot1x Authentication List page, click Security  Management Security > Authentication List  Dot1x Authentication List. Managing Device Security 408