Netgear XCM89UP Web Management User Guide - Page 162
MST Configuration, Switching > STP > Advanced
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
M6100 Web Management User Guide Field Designated Bridge Designated Port Topology Change Acknowledge Edge port Point-to-point MAC CST Regional Root CST Path Cost Port Up Time Since Counters Last Cleared Loop Inconsistent State Transitions Into Loop Inconsistent State Transitions Out Of Loop Inconsistent State Description Bridge Identifier of the bridge with the Designated Port. It is made up using the bridge priority and the base MAC address of the bridge. Port Identifier on the Designated Bridge that offers the lowest cost to the LAN. It is made up from the port priority and the interface number of the port. Identifies whether the next BPDU to be transmitted for this port would have the topology change acknowledgement flag set. It is either "True" or "False". Indicates whether the port is enabled as an edge port. It takes the value "Enabled" or "Disabled". Derived value of the point-to-point status. Bridge Identifier of the CST Regional Root. It is made up using the bridge priority and the base MAC address of the bridge. Path Cost to the CST Regional Root. Time since the counters were last cleared, displayed in Days, Hours, Minutes, and Seconds. This parameter identifies whether the port is in loop inconsistent state or not. The number of times this interface has transitioned into loop inconsistent state. The number of times this interface has transitioned out of loop inconsistent state. MST Configuration Use the Spanning Tree MST Configuration page to configure Multiple Spanning Tree (MST) on the switch. To display the Spanning Tree MST Configuration page, click Switching > STP > Advanced MST Configuration. To configure an MST instance: 1. To add an MST instance, configure the MST values and click Add: Configuring Switching Information 162