Netgear GC108P User Manual - Page 87

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power This name can be up to 16 characters and is case-sensitive. 10. From the Status menu, select Enable to send traps to the receiver or select Disable to prevent the switch from sending traps to the receiver. 11. Click the Add button. The receiver configuration is added. Modify information about an existing SNMP trap recipient To modify information about an existing SNMP trap recipient: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. For information about finding the IP address of the switch, see Access the switch on page 14. The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register and access the switch with your NETGEAR account on page 29. 4. Enter one of the following passwords: • After registration, enter your customized local device password. • If you previously added the switch to an Insight network location, enter the Insight network password. For more information about the local device password and the Insight network password, see Credentials for the local browser UI on page 28. 5. Click the Login button. The System Information page displays. 6. Select System > SNMP > SNMP V1/V2 > Trap Configuration. The Trap Configuration page displays. 7. Select the check box next to the recipient. 8. Change the fields as necessary. 9. Click the Apply button. Your settings are saved. Configure System Information 87 User Manual