Netgear GC108P User Manual - Page 425

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power For more information about the local device password and the Insight network password, see Credentials for the local browser UI on page 28. 5. Click the Login button. The System Information page displays. 6. Select Monitoring > Ports > Port Statistics. The Status page displays. 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table header: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default setting. • LAG. Only LAGs are displayed. • All. Both physical interfaces and LAGs are displayed. 8. Select one or more interfaces by taking one of the following actions: • To reset a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. • To reset multiple interfaces, select the check box associated with each interface. 9. Click the Clear button. The counters for the interface are reset to 0. View or clear the detailed port statistics You can view a variety of per-port traffic statistics. To view or clear the detailed port statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. For information about finding the IP address of the switch, see Access the switch on page 14. The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register and access the switch with your NETGEAR account on page 29. 4. Enter one of the following passwords: • After registration, enter your customized local device password. Monitor the Switch 425 User Manual