Netgear GC108P User Manual - Page 289

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power • SSL DH Strong Encryption Parameter PEM File. SSL Diffie-Hellman Strong Encryption Parameter File (PEM Encoded) 8. From the Server Address Type menu, select IPv4 or DNS to indicate the format of the TFTP/SFTP/SCP Server Address field. The default is IPv4. 9. In the TFTP Server IP field, specify the address of the TFTP server. The address can be an IP address in standard x.x.x.x format or a host name. The host name must start with a letter of the alphabet. Make sure that the software image or other file to be downloaded is available on the TFTP server. 10. In the Remote File Path field, enter the path of the file to download. You can enter up to 96 characters. The default is blank. 11. In the Remote File Name field, enter the name of the file on the TFTP server to download. You can enter up to 32 characters. The default is blank. 12. Select the Start File Transfer check box. 13. Click the Apply button. The file transfer starts. A status message displays during the transfer and upon successful completion of the transfer. Control access with profiles and rules Access control allows you to configure an access control profile and set rules for access to the local browser UI, access by SNMP stations, and client access to a TFTP server. We refer to an access control profile as an access profile. You can add a single access profile, which you can configure, activate, or deactivate. CAUTION: If you configure a security access profile incorrectly and you activate the access profile, you might no longer be able to access the switch's local browser UI. If that situation occurs, you must reset the switch to factory default settings (see Reset the switch to its factory default settings on page 375). Manage Switch Security 289 User Manual