Netgear GC108P User Manual - Page 235

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register and access the switch with your NETGEAR account on page 29. 4. Enter one of the following passwords: • After registration, enter your customized local device password. • If you previously added the switch to an Insight network location, enter the Insight network password. For more information about the local device password and the Insight network password, see Credentials for the local browser UI on page 28. 5. Click the Login button. The System Information page displays. 6. Select QoS > CoS > Advanced > Interface Queue Configuration. 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table header: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default setting. • LAG. Only LAGs are displayed. • All. Both physical interfaces and LAGs are displayed. 8. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. Configure Quality of Service 235 User Manual