Netgear GC108P User Manual - Page 238

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power • If you previously added the switch to an Insight network location, enter the Insight network password. For more information about the local device password and the Insight network password, see Credentials for the local browser UI on page 28. 5. Click the Login button. The System Information page displays. 6. Select QoS > CoS > Advanced > DSCP to Queue Mapping. 7. For each DSCP value, select from the corresponding Queue menu which internal traffic class must be mapped to the DSCP value. The traffic class is the hardware queue for a port. Higher traffic class values indicate a higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues to be sent. The allowed Per Hop Behavior (PHBs) values, apart from other DSCP experimental values, are as follows: • Class Selector (CS) PHB. These values are based on IP precedence. • Assured Forwarding (AF) PHB. These values define four main levels to sort and manipulate some flows within the network. • Expedited Forwarding (EF) PHB. These values are used to prioritize traffic for real-time applications. In many situations, if the network exceeded traffic and you need some bandwidth guaranteed for an application, the EF traffic must receive this rate independently of the intensity of any other traffic attempting to transit the node. 8. Click the Apply button. Your settings are saved. Configure Quality of Service 238 User Manual