Netgear GC108P User Manual - Page 388

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power 5. Click the Login button. The System Information page displays. 6. Select Maintenance > File Management > Dual Image > Dual Image Configuration. The Dual Image Configuration page displays. 7. From the Image Name menu, select the image that is not the image displayed in the Current-active field. The Current-active field displays the name of the active image. 8. To specify a name for the selected image, enter one in the Image Description field. 9. Select the Activate Image check box. 10. Click the Apply button. Your settings are saved. Note: After activating an image, you must perform a system reset of the switch to run the new code. The switch continues running the image shown in the Current-active field until the switch reboots. Delete an image To delete an image: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. For information about finding the IP address of the switch, see Access the switch on page 14. The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register and access the switch with your NETGEAR account on page 29. 4. Enter one of the following passwords: • After registration, enter your customized local device password. • If you previously added the switch to an Insight network location, enter the Insight network password. For more information about the local device password and the Insight network password, see Credentials for the local browser UI on page 28. Perform Maintenance Tasks 388 User Manual