Netgear GC108P User Manual - Page 215

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power The System Information page displays. 6. Select Routing > VLAN > VLAN Routing Wizard. 7. In the VLAN ID field, specify the VLAN Identifier (VID) associated with this VLAN. The VID is 1 to 4093 characters in length. 8. In the IP Address field, define the IP address of the VLAN interface. 9. In the Network Mask field, define the subnet mask of the VLAN interface. 10. In the Ports table, click each port once, twice, or three times to configure one of the following modes or reset the port to the default settings: • T (Tagged). Select the ports on which all frames transmitted for this VLAN are tagged. The ports that are selected are included in the VLAN. • U (Untagged). Select the ports on which all frames transmitted for this VLAN are untagged. The ports that are selected are included in the VLAN. By default, the selection is blank, which means that the port is excluded from the VLAN. 11. In the LAG table, click each LAG once, twice, or three times to configure one of the following modes or reset the LAG to the default settings: • T (Tagged). Select the LAGs on which all frames transmitted for this VLAN are tagged. The LAGs that are selected are included in the VLAN. • U (Untagged). Select the LAGs on which all frames transmitted for this VLAN are untagged. The LAGs that are selected are included in the VLAN. By default, the selection is blank, which means that the LAG is excluded from the VLAN. 12. Click the Apply button. Your settings are saved. Configuring Routing 215 User Manual