Netgear GC108P User Manual - Page 440

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power The remote server is added. The Status field in the Server Configuration table shows whether the remote logging host is currently active. Modify the settings for a remote syslog server To modify the settings for a remote syslog server: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. For information about finding the IP address of the switch, see Access the switch on page 14. The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register and access the switch with your NETGEAR account on page 29. 4. Enter one of the following passwords: • After registration, enter your customized local device password. • If you previously added the switch to an Insight network location, enter the Insight network password. For more information about the local device password and the Insight network password, see Credentials for the local browser UI on page 28. 5. Click the Login button. The System Information page displays. 6. Select Monitoring > Logs > Server Log. The Server Log Configuration page displays. 7. Select the check box that is associated with the server. 8. Change the information as needed. 9. Click the Apply button. Your settings are saved. Monitor the Switch 440 User Manual