Netgear GC108P User Manual - Page 181

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power The System Information page displays. 6. Select Switching> Multicast > IGMP Snooping Querier > Querier VLAN Configuration. The Querier VLAN Configuration page displays. 7. From the VLAN ID menu, select the VLAN ID. 8. Click the Delete button. Your settings are saved. The IGMP snooping querier is no longer supported on the VLAN. The VLAN itself is not deleted. Display the IGMP snooping querier status for VLANs To display the IGMP snooping querier status for VLANs: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. For information about finding the IP address of the switch, see Access the switch on page 14. The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register and access the switch with your NETGEAR account on page 29. 4. Enter one of the following passwords: • After registration, enter your customized local device password. • If you previously added the switch to an Insight network location, enter the Insight network password. For more information about the local device password and the Insight network password, see Credentials for the local browser UI on page 28. 5. Click the Login button. The System Information page displays. 6. Select Switching> Multicast > IGMP Snooping Querier > Querier VLAN Status. The Querier VLAN Status page displays. 7. To refresh the page with the latest information about the switch, click the Refresh button. Configure Switching 181 User Manual