Epson ColorWorks C7500 Technical Reference Guide - Page 93

Layout settings Chapter 3 Handling Item Description Media layout name Sets the media layout name. Enter a name. 3 Defined media layout The defined media layout in the list is displayed. Media form Sets the media form. Layout Information (mm) Sets the media width, label width, left gap, label length and blackmark interval. Layout information that can be set changes depending on the media form. Before setting the layout information, set the media form. Borderless printing Sets the borderless printing. When the margins are zero, the print may extend outside of the media/label. Use it accordingly. For detail, refer to "Setting the label size and paper layout for borderless printing" on page 151. Feather edges When [Feather edges] is checked, gradation processing is performed on the margin areas. It can be set only when [Borderless printing] is checked. When printing on long labels, depending on the media, the printing result may not reach the specified length. As a result, provided the paper feed direction is up, the bottom edge of the label may be blank. If this blank bothers you, try the method below. Step 1: Check the printing result. Step 2: Add the blank section to the specified label length in the layout setting menu. 93