Epson ColorWorks C7500 Technical Reference Guide - Page 37

Installing the Printer Secure sufficient space in a location appropriate for installation.  Two people are required to lift up this product. CAUTION Chapter 2 Setup  The weight of this product is approximately 37 kg {81.57 lb}. When lifting up this product, place the 2 product between two people as shown in the figure below and hold the recessed areas on both sides of the product. Carrying the product by holding other areas may damage the product. When placing the product on the floor, be careful not to get your fingers caught between the product and the installation surface.  Lift up this product in a natural posture, for example, bending your knees a sufficient amount. Lifting the product in an inappropriate posture may cause injury to the worker or damage to the product.  Do not tilt the product more than 10 degrees in any direction while carrying it. Doing so may cause an accident.  When transporting this printer, do not put it upside down or topple over sideways.  Do not place anything that weighs more than 10 kg on top of the printer. The printer may be damaged if an excessive force is applied.  Do not install the printer at a high location where it may fall during operations.  Do not install the printer at a location that is subject to vibration or impact. Make sure that the printer is installed at a location that is not subject to vibration or impact during operations. If vibration or impact was applied to the printer during operations, nozzle verification may be performed repeatedly to avoid malfunction of the Nozzle Verification Technology. When nozzle verification is performed repeatedly, it may take longer to process the operations and throughput may decline.  While installing the printer, make sure that no cords or foreign objects are tucked under the printer.  Be careful not to apply a strong impact to the printer during operations or processing as it may affect printing. 37