Epson ColorWorks C7500 Technical Reference Guide - Page 205
Perforated line, Length of the, uncut portion, Length of the portion
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Appendix Media type Media source Backing paper width Label width Label length Gap between labels Left and right outer edges Label edge R Width of a black mark Length of a black mark Gaps between black marks Paper thickness Perforated line pitch Form of perforated line Number of folds Plain label / Matte label Fanfold paper 50 to 112 mm {1.97 to 4.41"} 46 to 108 mm {1.81 to 4.25"} 25.4 to 301.8 mm {1 to 11.88"} 3 to 6 mm {0.12 to 0.24"} 2 mm 0.5 mm {0.08 0.020"} 1.5 mm {0.06"} or less 28 mm {1.10"} or more from paper edge 5 mm {0.20"} or more 28.4 to 304.8 mm {1.12 to 12.0"} 0.161 to 0.164 mm {0.006 to 0.006"} (reference value) 203.2 to 304.8 mm {8 to 12"} 1 mm {0.039"} uncut, 5 mm {0.20"} cut 750 or less Do not use the paper with a hole or cutout. Autocutting on the perforated lines may generate minute paper dust, causing machine problems. Also, autocutting ahead of the perforated line may cause problems when feeding paper. Therefore, autocutting must be performed 0.5 to 1 mm {0.02 to 0.039"} behind the perforated line. Therefore, set the black mark position 2 mm {0.08"} or more from the perforation. For the black mark position of the die-cut label paper, match the label edge to the black mark edge. The perforations on both sides of the paper shall be uncut. 1 mm { 0.04"} +1 -0 1 mm { 0.04"} +1 -0 Perforated line Length of the uncut portion Length of the portion 205