Epson ColorWorks C7500 Technical Reference Guide - Page 168
LCD display, Error, Description, Recovery method, PAPER COVER OPEN
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
LCD display Error PAPER JAM ERROR ## (##: D1 to D5, DC, 11 to 15, 21 to 25, 51, 61) Paper jam error NO PAPER ERROR No paper error PAPER PATH ERROR Paper path error PAPER REMOVAL ERROR Paper removal error ROLL COVER OPEN Roll paper cover open PAPER COVER OPEN Paper set cover open FRONT COVER OPEN Front cover open INK CARTRIDGE COVER OPEN Ink cartridge cover open Description Recovery method Paper is jammed inside printer Paper has run out during printing 1. Open the paper set cover. 2. Open the front cover. If you cannot open the front cover, the cutter blade may be locked. Turn this product's power off and on again. 3. Remove all the paper that is in the paper path. 4. Close the front cover. 5. Run auto loading of the paper. 6. Close the paper set cover. If any paper remains in the paper path, remove it. Then set new paper in place. The paper supply method for the paper set is different from the method specified in the "Media supply method settings". Set paper in place that is appropriate for the "Media supply method settings", or change the "Media supply method settings" to suit the paper. The method of the paper supply set to the printer is different from the specified method of the paper supply on "the label printing application" or "the printer driver provided by the label printing application manufacturer". Set the method of paper supply specified on "the label printing application" or "the printer driver provided by the label printing application manufacturer" to that is suitable for the actual supply. For instructions on how to change the settings, refer to "Media detector and paper path settings when using label printing applications" on page 227. Paper is not set correctly in place, or paper has not been removed after ejection operation. If no paper remains on the platen: Set paper in place again. See Appendix C for how to set the paper in place. If paper remains on the platen: 1. Open the paper set cover. 2. Open the front cover. 3. Remove all the paper that is in the paper path. 4. Close the front cover. 5. Run auto loading of the paper. When there is not much roll paper left, printing ended near the end of the roll paper. Replace the roll paper. The roll paper cover is open. Close the roll paper cover. The paper set cover is open Close the paper set cover. The front cover is open Close the front cover. The ink cartridge cover is open. Close the ink cartridge cover. 168