Epson ColorWorks C7500 Technical Reference Guide - Page 178

Continuous printing cannot be performed State The printing stops midway and "Head maintenance" is displayed. Blank labels are discharged without printing. Cause The printer is waiting for data from the computer. The printing area overlaps the 3 mm gap between label pages. The printing area overlaps the 3 mm gap between label pages. Recovery method On the printer driver Properties window, click the "Advanced" tab and try the "Spool print documents so program finishes printing faster" setting. If the die-cut label (gap 3 mm) is used and "Borderless Printing" is enabled, correctly configure the "Page layout" to ensure that the printing area doesn't fall on the 3 mm. If the die-cut label (gap 3 mm) is used and "Borderless Printing" is enabled, correctly configure the "Page layout" to ensure that the printing area doesn't fall on the 3 mm. External supply State Media gap detection cannot be selected with fanfold paper. Cause Recovery method This is the specification of the product. To avoid paper jams, the mount of fanfold paper is specified thicker than roll paper. Because the mount is thick, gap detection may not be possible even on genuine paper. The usable label media range becomes wider by adjusting the threshold value of the gap detector from the printer driver; however, this is not guaranteed for all media. Therefore, gap detection cannot be performed on fanfold paper by the specifications. In the case of roll media, gap detector can be used in the specifications because the same original roll/mount are specified. 178