Epson ColorWorks C7500 Technical Reference Guide - Page 65

Chapter 2 Setup Network settings Set the IP address of the product following the steps below.  When using the product with an Ethernet connection, it is necessary to setup the network. When using with a USB connection, network settings are not necessary.  When performing network settings, obtain the necessary information from a network administrator.  The network setting can be checked by printing the status sheet. See "Printing the status sheet (Network settings)" on page 84. 1 Turn on the product. 2 Press the (Menu) button to display the menu. 3 Select [I/F SETUP] and press the OK button. 4 Select [NETWORK SETUP] and press the OK button. 5 Select [IP ADDRESS] and press the OK button. 6 Select [AUTO] or [MANUAL]. When [AUTO] is selected, the network settings are complete. When [MANUAL] is selected, go to Step 7 and set IP address, etc. 7 Select [IP ADDRESS] and press the OK button. 8 Enter the IP address. Use the button to select a number and the digit to be changed. 2 buttons to select the 9 Press the OK button. 10 Select [SUBNET MASK] and press the OK button. 11 Enter the Subnet mask. For the input method, refer to the input of the IP address in Step 8. 65