Epson ColorWorks C7500 Technical Reference Guide - Page 160
Cleaning the Printer, Cleaning the autocutter
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Cleaning the Printer Cleaning the autocutter If adhesive matter from the label paper adheres to the autocutter, the autocutter may become blunt. In this case, clean the autocutter with the following steps. 1 Turn the printer power off, and disconnect the AC cable from the wall outlet. 2 Open the roll paper cover and remove the paper. See "How to eject paper for paper replacement" on page 61 3 Remove the adhesive on the autocutter fixed blade of the roll paper cover side with a cotton swab. Slightly moisten the cotton swab with alcohol, if necessary. Do not touch the autocutter fixed blade directly with fingers during cleaning, or injury may result. WARNING 160
160
Cleaning the Printer
Cleaning the autocutter
If adhesive matter from the label paper adheres to the autocutter, the autocutter may become blunt.
In this case, clean the autocutter with the following steps.
1
Turn the printer power off, and disconnect the AC cable from the wall outlet.
2
Open the roll paper cover and remove the paper.
See
"How to eject paper for paper replacement" on page 61
3
Remove the adhesive on the autocutter fixed blade of the roll paper cover side with a
cotton swab. Slightly moisten the cotton swab with alcohol, if necessary.
WARNING
Do not touch the autocutter fixed blade directly with fingers during cleaning, or injury may result.