Epson ColorWorks C7500 Technical Reference Guide - Page 45

Chapter 2 Setup Replacing the ink cartridge As the product is being used, the status of the ink cartridge changes as shown below.  Ink is running low  Ink cartridge is expended Ink is running low When any of the ink is running low, the LED flashes and the icon [ ] is displayed on the LCD. An ink cartridge of that color should be prepared for replacement. The number of printable papers that can be printed before ink cartridge replacement depends on usage conditions. When "INK LOW LED" is set to not be displayed, the Ink LED does not flash. Ink cartridge is expended 2 When any of the ink cartridges is expended, the LED is lit, the icon [ ] is displayed on the LCD, and the printer changes to offline. Change to an ink cartridge with enough ink level using the following steps. 1 Check that the Ink LED is ON. Also, check the ink cartridge to be replaced with the LCD display. 2 Open the ink cartridge cover. 3 Push the ink cartridge to be replaced slowly. After making sure that its lock is unlocked, pull the ink cartridge out toward you. 4 Shake the ink cartridge package four or five times before opening it. 5 Push the ink cartridge into the product slowly until you hear the click sound. 6 Close the ink cartridge cover. 7 When replacement of the ink cartridge is complete, the Ink LED becomes OFF. 8 The product switches to the pause state. Push the Pause button to release it, and the product returns to the idle state. 45