Epson ColorWorks C7500 Technical Reference Guide
Epson ColorWorks C7500 Manual
 |
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ColorWorks C7500 manual content summary:
- Epson ColorWorks C7500 | Technical Reference Guide - Page 1
/ Series Technical Reference Guide Series Product Overview Describes features for the product. Setup Describes setup and installation of the product and peripherals. Handling Describes how to handle the product. Application Development Information Describes how to control the printer and necessary - Epson ColorWorks C7500 | Technical Reference Guide - Page 2
to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those - Epson ColorWorks C7500 | Technical Reference Guide - Page 3
printing, information regarding maintenance, and solutions to various kinds of trouble. Be sure to read this document thoroughly before use and kg {81.57 lb}. ("Installing the Printer" on page 37) Hold the parts of the product specified in this manual when lifting up this product. Otherwise, the - Epson ColorWorks C7500 | Technical Reference Guide - Page 4
product. Other use may cause electric shock or fire. Do not use a damaged power cable. Doing so may cause electric shock or fire. Contact qualified service personnel if the power cable is damaged. Observe the following points so as not to damage the power cable: Do not modify the power cable - Epson ColorWorks C7500 | Technical Reference Guide - Page 5
when a fault or other problem occurs, and contact qualified service personnel. Shut down cause fire or injury. Follow the instructions in this manual to install them properly. Before film. If the printer is out of use for a prolonged period, it could develop problems due to dust building up - Epson ColorWorks C7500 | Technical Reference Guide - Page 6
, ink may get into your eyes or adhere to your skin. It may also prevent you from printing correctly. Ink may leak and damage the printer. Do not remodel the ink cartridge. Doing so may cause printing malfunction. Use of an old ink cartridge may result in reduced print quality. Use - Epson ColorWorks C7500 | Technical Reference Guide - Page 7
transporting the printer. If you use a non-genuine Maintenance box that does not support this printer, it may affect the printer or legislations, and regulations of your country or community. Caution Label The caution label on the product indicates the following precaution. CAUTION Take - Epson ColorWorks C7500 | Technical Reference Guide - Page 8
Restriction of Use When this product is used for applications requiring high reliability/safety, such as transportation devices related to aviation, rail, marine, automotive, etc.; disaster prevention devices; various safety devices, etc.; or functional/precision devices, etc., you should use this - Epson ColorWorks C7500 | Technical Reference Guide - Page 9
was created to provide information on development, design, and installation of systems and development and design of printer applications for developers. Manual Content The manual is made up of the following sections: Chapter 1 Product Overview Chapter 2 Setup Chapter 3 Handling Chapter - Epson ColorWorks C7500 | Technical Reference Guide - Page 10
Supply ...4 Cautions on Handling ...5 Cautions on the Ink Cartridge / Maintenance box 6 Caution Label ...7 ■ Restriction of Use ...8 ■ About this Manual...9 Aim of the Manual...9 Manual Content ...9 ■ Contents...10 Product Overview 15 ■ Features...15 Printing...15 Operability ...16 Reliability - Epson ColorWorks C7500 | Technical Reference Guide - Page 11
36 ■ Installing the Printer...37 Location Appropriate for rewinder 50 ■ Setting the Paper...52 Setting the Roll Paper ...52 Setting the Fanfold Paper ...60 How to eject paper for paper replacement...61 Ejection Angle of Printed Paper ...62 ■ Printer Printer Driver 76 Handling ...77 ■ List of printer - Epson ColorWorks C7500 | Technical Reference Guide - Page 12
Borderless Printing Concepts ...151 Label Media Design ...152 Borderless Printing Settings ...152 ■ USB Printer Class Device Replacement Service 157 Uninstallation of USB Printer Class Device Replacement Service 157 Restrictions in USB Printer Class Device Replacement Service 158 ■ Setting the - Epson ColorWorks C7500 | Technical Reference Guide - Page 13
Information 183 ■ How to Control the Printer 183 Using label printing application ...183 Using the Epson Inkjet Label Printer SDK...184 Using the ESC/Label commands ...184 Changing Printer Settings and Replacing the Printer 184 ■ Software and Manuals ...190 ■ Installing software ...192 Software - Epson ColorWorks C7500 | Technical Reference Guide - Page 14
Cartridge...223 Maintenance Box ...223 ■ Option Specifications ...224 Rewinder (TU-RC7508) ...224 ■ LCD Display Specifications for 225 ■ Downloading Drivers, Utilities, and Manuals 226 ■ Media detector and paper path settings when using label printing applications 227 Changing the media detector - Epson ColorWorks C7500 | Technical Reference Guide - Page 15
Product Overview This chapter describes features of the product. Features TM-C7500/TM-C7500G is a 4-color inkjet label printer that offers high processing speed, operability and reliability required for on-demand label printing. Printing 1 High speed printing Actualizes 300 mm/s high speed - Epson ColorWorks C7500 | Technical Reference Guide - Page 16
printer driver that can be used with Windows applications is available. For the label printing applications listed below, we provide dedicated drivers for the TM-C7500/TM-C7500G series application. Epson Inkjet Label Printer SDK (a Windows printer driver is used) that supports the customer's - Epson ColorWorks C7500 | Technical Reference Guide - Page 17
Label" on page 86. In case of a USB printer, because new print cues are generated when the damaged printer is replaced with other printer, the settings of an application or printer driver become necessary. This product provides the function (USB Printer Class Device Replacement Service - Epson ColorWorks C7500 | Technical Reference Guide - Page 18
" on page 19 . Open this cover to install/replace the ink cartridge. Open this cover to remove jammed paper. Open this cover to install the rewinder (option). Open this cover to install/replace the maintenance box. Open this cover to set roll paper. Open this cover to set roll paper or - Epson ColorWorks C7500 | Technical Reference Guide - Page 19
Press this button during printing to pause printing after one page of data is printed. Press this button while the printer is paused (while the Pause LED is on) to resume printer operation and have the printer return to the print standby status. Press this button for less than two seconds while the - Epson ColorWorks C7500 | Technical Reference Guide - Page 20
you perform a back feed once, you cannot execute a back feed until the paper is set again. When handling roll paper like setting it to the rewinder, do so after pausing printer operations temporarily by pushing the Pause button. When separating perforations of fanfold paper, do so after pausing - Epson ColorWorks C7500 | Technical Reference Guide - Page 21
the Dip Switch Cover Mounting Screw and open the cover. When setting the Power button operation to "Power switch disabled (Reset operation)", make sure the printer is not operating when turning the power OFF. 21 - Epson ColorWorks C7500 | Technical Reference Guide - Page 22
"Nozzle check interval" and/or "Threshold of clogged nozzles", depending on level of requirement for missing dots. And when unrecoverable clogging occurs, this printer is able to carry out supplemental printing using a nearby nozzle. If you set "Enable" for the nozzle clog auto supplement system, it - Epson ColorWorks C7500 | Technical Reference Guide - Page 23
Chapter 1 Product Overview Setting the Nozzle Verification Technology Enable / Disable Enable / Disable of Nozzle Verification Technology is set. The factory setting is "Enable". Settings It can be set from the setting menu of the product and PrinterSetting. See "Setting panel switch" on page 80 or - Epson ColorWorks C7500 | Technical Reference Guide - Page 24
Dot substitution The dot substitution is a function that performs complementary printing using the nearby nozzles when nozzles are clogged. The maximum number of clogged nozzles that can be automatically supplemented is 16. However, supplementation cannot be performed adequately in the case of - Epson ColorWorks C7500 | Technical Reference Guide - Page 25
of periodic auto cleaning. If periodic auto cleaning implementation time setting is disabled, periodic auto cleaning will be implemented at a time that the printer judges necessary, for example when a fixed time has elapsed since the previous periodic auto cleaning. If the power is off at the - Epson ColorWorks C7500 | Technical Reference Guide - Page 26
LED Ink LED For 2 seconds after the power is turned ON - EPSON TM-C**** For 2 to 4 seconds after the power is turned ON The LCD. INITIALIZING 4 seconds after the power is turned ON and until the printer switches to the idling status The LCD displays the remaining level of ink and - Epson ColorWorks C7500 | Technical Reference Guide - Page 27
to go to the setting mode from this state. MENU ●✓- - - **** * CANCELING JOB Menu Canceling the jobs When the Menu button is pushed, the printer becomes this status. 1 When the Cancel button is pushed during printing, print jobs are canceled, printing is interrupted and print data inside the - Epson ColorWorks C7500 | Technical Reference Guide - Page 28
loaded. Ink charging Performing ink charging (initial charge). Caution: Do not turn this product's power OFF until it is finished. Executing ink sequence Printer head maintenance is being executed. Caution: Do not turn this product's power OFF until it is finished. Ink is running low (*1) The - Epson ColorWorks C7500 | Technical Reference Guide - Page 29
product is beyond its service life. Malfunction (*1) Printer maintenance is necessary. No printing can be performed. PRINTER ERROR Fatal error (*1) A fatal error occurred in the printer. No printing can be performed. Repairs are required. *1: Recovery method: See "Troubleshooting" on page 167 - Epson ColorWorks C7500 | Technical Reference Guide - Page 30
Ink Cartridge and Maintenance Box Status You can check the status of the printer, the ink cartridges, and the maintenance box from the LCD. Row 1: displays the printer's status Row 2: displays the status of the ink cartridges and maintenance box Amount remaining for the ink cartridge Amount used - Epson ColorWorks C7500 | Technical Reference Guide - Page 31
the sound off) Number Sounding period Silent of the pat- period tern Overall time Number of times repeated Printer event repeated Service required 1 Printer error Replace ink cartridge 500 ms 200 ms Replace maintenance box 5 6 seconds Until the error fac- Media detection - Epson ColorWorks C7500 | Technical Reference Guide - Page 32
the time from paper loading up until the yellow head's printing operation ends. This printer employs the 4-color line printing method, and so the reprinting will print one or more (depending on the length of the labels used) unfinished pages in which printing by some of the heads only is completed - Epson ColorWorks C7500 | Technical Reference Guide - Page 33
Chapter 2 Setup Setup This chapter describes the installation and setup of the product and peripherals necessary before using this product. This product can be set up using the following methods. Perform setup following the Install Navi on the included CD-ROM. (page 34) Use the computer to start - Epson ColorWorks C7500 | Technical Reference Guide - Page 34
instructions on the screen from here on to setup this product. One of the setup steps of Install Navi is "Software installation" in which printer if you are installing the rewinder. How to install the REWINDER (page 49) Attaching the paper leading edge to the rewinder (page 50) This completes - Epson ColorWorks C7500 | Technical Reference Guide - Page 35
Checking the Items Included in the Package (page 36) 2. Installing the Printer (page 37) 3. Connecting the Power Cable (page 39) 4. Connecting to install the REWINDER (page 49) 7. Setting the Paper (page 52) 8. Attaching the paper leading edge to the rewinder (page 50) 9. Printer settings (page 63 - Epson ColorWorks C7500 | Technical Reference Guide - Page 36
the Items Included in the Package When using the printer for the first time, check the items included in the package. The items included in the package are as follows: A B C D E F G A TM-C7500 Series D USB cable G Cushioning material *2 B Ink cartridge(C, M, Y, K) *1 E Roll paper C CD - Epson ColorWorks C7500 | Technical Reference Guide - Page 37
while carrying it. Doing so may cause an accident. When transporting this printer, do not put it upside down or topple over sideways. Do not place anything operations. If vibration or impact was applied to the printer during operations, nozzle verification may be performed repeatedly to - Epson ColorWorks C7500 | Technical Reference Guide - Page 38
Location Appropriate for Installation Install this product in a location as follows: On a level and stable surface that can support the weight of the product (approx. 37 kg {81.57 lb}). On an area larger than the bottom surface of the product. In a well-ventilated - Epson ColorWorks C7500 | Technical Reference Guide - Page 39
. Be sure to install this product in the vicinity of a power outlet so that you can immediately unplug the product if some fault or other problem occurs. 1 Insert the power cable connector into the AC inlet on the product securely to the bottom. 2 Fully insert the power plug securely into the - Epson ColorWorks C7500 | Technical Reference Guide - Page 40
Connecting the Interface Cable Connect the interface cable to be used to the connector on the rear side of the printer. When using a USB cable, pass the cable through the wire saddle to prevent accidental disconnection. CAUTION Wire Saddle 40 - Epson ColorWorks C7500 | Technical Reference Guide - Page 41
Turning On/Off This section describes how to turn on/off the product. Turning On 1 Press (Power) button. Chapter 2 Setup 2 2 (Power) LED lights up and the power turns on. Turning Off 1 Hold down (Power) button for one second or more. 2 (Power) LED turns off and the power turns off. 41 - Epson ColorWorks C7500 | Technical Reference Guide - Page 42
Installing the Ink Cartridge Install the ink cartridge by following the steps below. CAUTION Read the handling instructions carefully before installing the ink cartridge. See "Cautions on the Ink Cartridge / Maintenance box" on page 6 or "Ink Cartridge" on page 223. 1 Turn on the - Epson ColorWorks C7500 | Technical Reference Guide - Page 43
Chapter 2 Setup 4 Push all the ink cartridges of the four colors gently into the product until they click in place. Check the color of the ink cartridge label and of the ink cartridge holder label, and set the cartridges to each matching color. 2 43 - Epson ColorWorks C7500 | Technical Reference Guide - Page 44
may require replacement of the ink cartridge before completion of charging. The ink cartridge included in the product package is used for initial charging. The printer uses ink to prepare for printing when the ink cartridge is installed for the first time. It takes at least 10 minutes to charge ink - Epson ColorWorks C7500 | Technical Reference Guide - Page 45
. Ink cartridge is expended 2 When any of the ink cartridges is expended, the LED is lit, the icon [ ] is displayed on the LCD, and the printer changes to offline. Change to an ink cartridge with enough ink level using the following steps. 1 Check that the Ink LED is ON. Also, check - Epson ColorWorks C7500 | Technical Reference Guide - Page 46
Installing the Maintenance box The Maintenance box is already installed when the product is shipped. CAUTION Read the handling instructions carefully before installing the Maintenance box. See "Cautions on the Ink Cartridge / Maintenance box" on page 6. Replacing Maintenance Box While using the - Epson ColorWorks C7500 | Technical Reference Guide - Page 47
and the product changes to offline. Change to a Maintenance box with enough free space using the following steps. 1 Check that the INK LED on the printer is lit up, and check that the maintenance box displays "REPLACE MAINT B" on the LCD. 2 Open the maintenance box cover towards you. 2 3 Pull out - Epson ColorWorks C7500 | Technical Reference Guide - Page 48
4 Put the maintenance box into the plastic bag for disposal of used maintenance box. 5 Push the new maintenance box gently in, with its labeled surface upward. 6 Close the maintenance box cover. 7 When the maintenance box replacement is completed, the INK LED turns off, and printing can be performed - Epson ColorWorks C7500 | Technical Reference Guide - Page 49
to install the REWINDER Install the rewinder with the following steps. 1 Open the rewinder connection cover on the front of the printer. Chapter 2 Setup 2 2 Insert the rewinder's power transmission gear into the cover opening. Make sure that the mark at the bottom of the rewinder is aligned with - Epson ColorWorks C7500 | Technical Reference Guide - Page 50
's lever in the direction of the arrow below, and remove the rewinder from the printer. Attaching the paper leading edge to the rewinder Attach the paper to the rewinder with the following steps. 1 Remove the rewinder's flange. 2 Press the Feed button and bring out approx. 800 mm {31.50"} of paper - Epson ColorWorks C7500 | Technical Reference Guide - Page 51
into the gap of the rotation axis. If a roll core is used: Fasten the paper leading edge to the core with tape, then turn the rewinder flange (roughly 2 rotations) to take up the slack paper. If no roll core is used: Insert the paper leading edge into the slot in the - Epson ColorWorks C7500 | Technical Reference Guide - Page 52
Setting the Paper Setting the Roll Paper Set the roll paper by following the steps below. 1 Turn on the product. 2 Open the paper set cover. 3 Open the roll paper cover. 52 - Epson ColorWorks C7500 | Technical Reference Guide - Page 53
Chapter 2 Setup 4 Pull out the roll paper flange while holding the release lever of the roll paper flange between your fingers. Release Lever 2 Roll Paper Flange 5 Attach the roll paper to the spindle, and push the core of the roll paper as far as possible so that it is securely fit it into place. - Epson ColorWorks C7500 | Technical Reference Guide - Page 54
6 Pull out the end of roll paper about 300 mm {11.8"} in order for the paper auto feeding in the step 12 to go smoothly. About 300 mm 7 Attach the roll paper flange to the spindle while holding the release lever of the roll paper flange between your fingers. Push the flange to the bottom to align it - Epson ColorWorks C7500 | Technical Reference Guide - Page 55
8 Open the paper hold inside the paper set cover. Chapter 2 Setup Paper Hold 2 9 Insert the paper along the paper guide (a). Align the end of the paper with Mark Paper Guide (a) mark. CAUTION Check to make sure there are no deformities, such as folds, rips, wrinkles, or peeling, in the edge - Epson ColorWorks C7500 | Technical Reference Guide - Page 56
the paper so it does not move around. Move the paper guide (b) to align it with the paper width while pushing the paper guide (b) lever. Lever Paper Guide (b) 11 Adjust the guide panel of the paper guide (b) so that it aligns perfectly with the edge of the paper. Paper Guide (b) Guide panel 56 - Epson ColorWorks C7500 | Technical Reference Guide - Page 57
cause misaligned printing or paper jams. Be careful of the following. Do not allow a gap to occur between the guide panel and the edge of the paper. Do not press the guide panel strongly against the edge 2 of the paper. 12 Insert the end of the paper into the paper feed slot - Epson ColorWorks C7500 | Technical Reference Guide - Page 58
paper hold, a gap of about 0.5 mm will automatically occur between the guide panel of the paper guide (b) and the edge of the paper. Paper will be fed properly with gap. After closing the paper hold, check if there is a gap between the guide panel and the edge of the paper. If there is no gap, it - Epson ColorWorks C7500 | Technical Reference Guide - Page 59
Chapter 2 Setup 14 If the paper is loose, turn the roll paper flange in the direction of the arrow to tighten the paper. 15 Close the roll paper cover. 2 16 Close the paper set cover. 17 Press the Pause button. 59 - Epson ColorWorks C7500 | Technical Reference Guide - Page 60
Setting the Fanfold Paper Set the fanfold paper by following the steps below. 1 Turn on the product. 2 Open the paper set cover. 3 Set the fanfold paper referring to Step 8 to 12 in " Setting the Roll Paper". 4 Close the paper set cover. 5 Place the fanfold paper straight 15 mm or more away from the - Epson ColorWorks C7500 | Technical Reference Guide - Page 61
. 2 Cut the paper, using the Cut button. 3 Press the Back Feed button for 1 second or longer. 4 Open the paper set cover. 5 Open the paper guide's two paper hold levers, and remove the paper. In the case of fanfold paper, that completes paper ejection. Paper Hold 2 6 In the case of roll - Epson ColorWorks C7500 | Technical Reference Guide - Page 62
straight from the paper ejection guides, as shown in the position to the next label, and the label is pulled into the printer. Therefore, when the printer is installed away from , such as setting it in the rewinder, press the Pause button to stop printer operation before carrying out the operation. - Epson ColorWorks C7500 | Technical Reference Guide - Page 63
the messages displayed on the LCD by following the steps below. 1 Turn on the product. 2 Press the (Menu) button to display the menu. 3 Select [PRINTER SETUP3] and press the OK button. 2 4 Select [LANGUAGE] and press the OK button. 5 Select the language to be used. The following languages are - Epson ColorWorks C7500 | Technical Reference Guide - Page 64
Set the current date and time by following the steps below. 1 Turn on the product. 2 Press the (Menu) button to display the menu. 3 Select [PRINTER SETUP3] and press the OK button. 4 Select [CLOCK] and press the OK button. 5 Enter the current date and time. Use the button to select a number - Epson ColorWorks C7500 | Technical Reference Guide - Page 65
[NETWORK SETUP] and press the OK button. 5 Select [IP ADDRESS] and press the OK button. 6 Select [AUTO] or [MANUAL]. When [AUTO] is selected, the network settings are complete. When [MANUAL] is selected, go to Step 7 and set IP address, etc. 7 Select [IP ADDRESS] and press the OK button. 8 Enter - Epson ColorWorks C7500 | Technical Reference Guide - Page 66
12 Press the OK button. 13 Select [DEFAULT GATEWAY] and press the OK button. 14 Enter the Default gateway. For the input method, refer to the input of the IP address in Step 8. 15 Press the OK button. 66 - Epson ColorWorks C7500 | Technical Reference Guide - Page 67
Paper settings The media source, media type, media form and media detection are set. When using a Windows driver: See "Set using a printer driver" on page 67 When not using a Windows driver: See "Setting using the PrinterSetting" on page 70 When setting up in an environment not connected - Epson ColorWorks C7500 | Technical Reference Guide - Page 68
3 Click [Media Detection]. 4 The "Media Detection Settings" screen is displayed. Select the Media source and Media Detection, and click [OK]. 5 Click [User Defined]. 6 The "User Defined Media Layout" screen is displayed. 7 Enter Media Layout Name. If there is an existing defined media layout, you - Epson ColorWorks C7500 | Technical Reference Guide - Page 69
enabled/disabled setting, margins of 1.5 mm are added to the Full-page label printing area top and bottom. 2 10 Click [Add]. User Defied Media other than genuine paper, select [Matte1] and adjust as needed. For TM-C7500, glossy paper is not displayed 14 Click [OK]. This completes the settings of - Epson ColorWorks C7500 | Technical Reference Guide - Page 70
Setting using the PrinterSetting 1 Turn on the product. 2 Start PrinterSetting. See "Starting the PrinterSetting" on page 88 3 The "Media settings" screen is displayed. 4 Set the Media source/Media detection/Media coating type. Click [Apply settings]. 70 - Epson ColorWorks C7500 | Technical Reference Guide - Page 71
Chapter 2 Setup 5 From the items on the left, select [Layout settings]. Click [Edit layout...]. 2 6 The "User Defined Media Layout" screen is displayed. 7 Enter Media Layout Name. If there is an existing defined media layout, you can create a new layout based on the defined media layout. 8 Select [ - Epson ColorWorks C7500 | Technical Reference Guide - Page 72
is performed on the margin areas. Irrespective of the [Borderless Printing] enabled/disabled setting, margins of 1.5 mm are added to the Full-page label printing area top and bottom. 10 Click [Add]. User Defied Media will be registered and displayed on the list of [Defined Media Layout]. 11 Click - Epson ColorWorks C7500 | Technical Reference Guide - Page 73
. 2 Press the (Menu) button to display the menu. 3 Select [PRINTER SETUP1] and press the OK button. 4 Select [MEDIA SOURCE] and press C7500G Series.). 8 Select [MEDIA FORM] and click the OK button. 9 Select media form and click the OK button. Select one from DIE-CUT LABEL/CONT. LABEL/CONT. - Epson ColorWorks C7500 | Technical Reference Guide - Page 74
Test printing You can check whether the printer is operating normally by printing the nozzle check pattern. Perform nozzle check printing by following the steps below. You can use nozzle check to check - Epson ColorWorks C7500 | Technical Reference Guide - Page 75
Windows XP Home Edition: Click [Control Panel] on [Start] menu, and click [Printers and Faxes]. For Windows Server 2003 R2: Click [Printers and Faxes] on [Start] menu. 2 Right-click [EPSON TM-C7500], and click [Printer properties]. Registered name of this product to display in the case of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 76
Home Edition: Click [Control Panel] on [Start] menu, and click [Printers and Faxes]. For Windows Server 2003 R2: Click [Printers and Faxes] on [Start] menu. 2 Right-click [EPSON TM-C7500], and click [Printing References]. The printer driver screen is displayed. Registered name of this product to - Epson ColorWorks C7500 | Technical Reference Guide - Page 77
3 Handling Handling This chapter describes basic handling of the printer. List of printer setting items Setting item Cleaning Nozzle check Media type Media form Media detection Media source Left gap adjustment Label width Label length Left margin Right margin Top margin Bottom margin Printing - Epson ColorWorks C7500 | Technical Reference Guide - Page 78
data printing Printing distance (non-resettable) display Printer distance (resettable counter 1) display Printer distance (resettable counter 2) display Labels printed count (resettable counter 1) display Labels printed count (resettable counter 2) display Cumulative carriage motion count display - Epson ColorWorks C7500 | Technical Reference Guide - Page 79
deleting the [Favorite setting] *2 Selecting the [Favorite setting] *2 Operation Panel - - ✔ PrinterSetting ✔ ✔ ✔ ✔ ✔ ✔ ✔ Printer Driver ✔* ✔* - ✔* ✔* - ✔ : Can be set. ✔* : When launching PrinterSetting from the printer driver, it is not displayed. - : Cannot be set. *1 : If the status level of - Epson ColorWorks C7500 | Technical Reference Guide - Page 80
Setting panel switch CLEANING NOZZLE CHECK PRINTER SETUP1 Settings menu item MEDIA TYPE MEDIA FORM MEDIA DETECT MEDIA SOURCE LEFT GAP LABEL WIDTH LABEL LENGTH LEFT MARGIN RIGHT MARGIN TOP MARGIN BOTTOM MARGIN V. POSITION H. POSITION PRINTING SPEED RESOLUTION HEAD MAINTENANCE PAPER HANDLING AFTER - Epson ColorWorks C7500 | Technical Reference Guide - Page 81
INTERVAL OPERATION AT CLOGGED NOZZLE THRESHOLD OF CLOGGED NOZZLES REPRINT POWER ON ACTION PAPER CHANGE ACTION PRINTER SETUP3 CANCEL ACTION SCHEDULED CLEAN CLEANING TIME INCOMPLETE LABEL * LCD BRIGHTNESS LCD CONTRAST BEEPER VOLUME INK LOW LED Available settings Default setting YES - NO - Epson ColorWorks C7500 | Technical Reference Guide - Page 82
PRINTER SETUP3 Settings menu item LANGUAGE COLOR CONTROLS MAINTENANCE :MM 0x20 to 7E 0x20 to 7E 0x20 to 7E YES NO YES NO YES NO YES NO EPSON PREFERRED EPSON STANDARD -6 to +4 -6 to 0 (Available settings vary with media type) ENABLE DISABLE ENABLE DISABLE -2 to +2 YES - Epson ColorWorks C7500 | Technical Reference Guide - Page 83
DEFAULT GATEWAY Available settings Default setting ********[mm] - ********[mm] - ********[mm] - ********[labels] - ********[labels] - ********[motions] - ********[motions] - MAIN - NETWORK FPGA CG AUTO MANUAL MANUAL 192.168.192.168 255.255.255.000 255 - Epson ColorWorks C7500 | Technical Reference Guide - Page 84
] and press the OK button. The product will print out the status sheet (Network settings). A status sheet (Network settings) printout sample HHHH Epson Status Sheet HHHH MAC Address xx:xx:xx:xx:xx:xx Software xxxxxxxxx Network Status AUTO(Disconnected) - Epson ColorWorks C7500 | Technical Reference Guide - Page 85
users This function is disabled when printing with TM-C7500/TM-C7500G Series printer drivers. You can use this function with the product firmware Ver.WAI30000 or later or with PrinterSetting Ver.1.2.0.0 or later. Instructions for use 3 1 In PrinterSetting, save the [Favorite setting] settings - Epson ColorWorks C7500 | Technical Reference Guide - Page 86
different from the printer settings, a media detection error or a paper path error will occur. If that happens, refer to the "Troubleshooting" section, set with product's firmware Ver.WAI32000 or later. Printer Settings Label Setting Items Setting Label Length: less than Value 4 cm Length of - Epson ColorWorks C7500 | Technical Reference Guide - Page 87
rights, PrinterSetting Ver.1.2.0.0 or later is necessary. If you open PrinterSetting with user rights and if any other software, such as the printer driver, is communicating with the product, you may not be able to modify the settings. We recommend opening PrinterSetting with administrator rights - Epson ColorWorks C7500 | Technical Reference Guide - Page 88
Start the PrinterSetting with the following methods. 1 Turn on the product. 2 Select [Start] - [All Programs] - [Epson] - [TM-C7500 Series] - [PrinterSetting]. 3 The [Select printer] screen is displayed. Select a search target and click [Search]. 4 This product is displayed in the list. Select - Epson ColorWorks C7500 | Technical Reference Guide - Page 89
5 Start the PrinterSetting. Chapter 3 Handling 3 89 - Epson ColorWorks C7500 | Technical Reference Guide - Page 90
Apply settings After setting each item, click [Apply settings] to change the settings of this product. 90 - Epson ColorWorks C7500 | Technical Reference Guide - Page 91
Sets the media to be used in this product. This setting screen is not displayed if you started PrinterSetting from the printer driver. 3 Item Media detection set- Media source tings Media detection Print settings Media coating type Paper feed adjustment Printing performance Printing - Epson ColorWorks C7500 | Technical Reference Guide - Page 92
Sets the media layout or creates a new User defined media layout. This setting screen is not displayed if you started PrinterSetting from the printer driver. Layout settings Item Media layout Edit layout Description Sets the media layout. Creates a new user defined media layout. When clicked, the - Epson ColorWorks C7500 | Technical Reference Guide - Page 93
the media, the printing result may not reach the specified length. As a result, provided the paper feed direction is up, the bottom edge of the label may be blank. If this blank bothers you, try the method below. Step 1: Check the printing result. Step 2: Add the blank section to the specified - Epson ColorWorks C7500 | Technical Reference Guide - Page 94
Position adjustment Adjusts the print start position or cut position. Justify Item Print start position adjustment (Vertical direction) Print start position adjustment (Horizontal direction) Cut position adjustment Description Adjusts the print start position in the vertical direction. Click [ - Epson ColorWorks C7500 | Technical Reference Guide - Page 95
Chapter 3 Handling Apply settings 1 Click [Start adjustment...] and the following screen is displayed. (Explained using the print start position adjustment (vertical direction) as an example.) 2 Enter the adjustment value and click [Apply settings]. 3 3 The confirmation screen is displayed. Click - Epson ColorWorks C7500 | Technical Reference Guide - Page 96
results adjustment Adjusts the color preset or the barcode. This setting screen is not displayed if you started PrinterSetting from the printer driver. Color preset Adjust barcode Item Description Mode Sets the color correction method. Ink profile Sets the ink concentration. Depending on - Epson ColorWorks C7500 | Technical Reference Guide - Page 97
Registers images, templates, fonts, and character code tables to the printer. Chapter 3 Handling 3 Item Image (Only .png) Template Font (Only .ttf and .tte) Character code table Description Registers an image used for preprinting or templates. Registers a - Epson ColorWorks C7500 | Technical Reference Guide - Page 98
using the commercially available label printing application that supports this product. When using an application that directly controls ZPL II or ESC/Label commands. This setting screen is not displayed if you started PrinterSetting from the printer driver. Item Description Set background - Epson ColorWorks C7500 | Technical Reference Guide - Page 99
driver from Zebra Technologies Corporation. When using the commercially available label printing application that supports this product. When using an application that directly controls ZPL II or ESC/Label commands. The preset image printing is not possible with an Epson printer driver. 99 - Epson ColorWorks C7500 | Technical Reference Guide - Page 100
Print head maintenance Performs a print head maintenance or nozzle check and sets periodic cleaning. Item Print head maintenance Manual head cleaning Nozzle check Specified time for print head maintenance Any time as needed Only at specified time Description Perform the nozzle check to - Epson ColorWorks C7500 | Technical Reference Guide - Page 101
Sets the printer. Chapter 3 Handling 3 Item Description Preferences Power on action Sets the action when the power is turned on. Paper replacement Sets the action when the paper - Epson ColorWorks C7500 | Technical Reference Guide - Page 102
Panel settings Display settings for the Operation Panel. Item Panel button settings Cancel button Feed button Cut button LCD settings LCD brightness LCD contrast Language Description Enables/disables the Cancel button. Enables/disables the Feed button. Enables/disables the Cut button. Sets - Epson ColorWorks C7500 | Technical Reference Guide - Page 103
Nozzle check settings Sets the nozzle check. Chapter 3 Handling 3 Item Description Nozzle check settings Nozzle Verification Technology Enables/disables the auto nozzle check. Trigger to Head Main- Sets the trigger to Head Maintenance. tenance The default setting is '0'. Additional auto - Epson ColorWorks C7500 | Technical Reference Guide - Page 104
sensor. Replace settings from Replace settings from Performs replacing settings from the printer using ZPL II commands. Click printer using ZPL II printer using ZPL II [Set] to display the "Replace settings from printer using ZPL II commands" commands commands screen. Set prefix text Sets the - Epson ColorWorks C7500 | Technical Reference Guide - Page 105
commands When you click [Default settings], the entered value returns to the printer's default value. When you click [Apply settings], the settings return to the printer's default settings. 1 Click [Set] for [Replace settings from printer using ZPL II commands] to display the "Replace settings from - Epson ColorWorks C7500 | Technical Reference Guide - Page 106
setting] can include 15 ASCII characters (20h - 7Eh), except for and '.'. You can save up to 100 items in [Favorite setting]. If you click [Load printer settings], the settings that have already been configured for this product will be loaded. 106 - Epson ColorWorks C7500 | Technical Reference Guide - Page 107
settings Here you can apply the saved favorite settings to the product. 1 Click [Select the Favorite Settings] in [Set Printer's Favorite Settings]. 2 The "Select Printer's Favorite Settings" window appears. Select the favorite settings you wish to apply in [Favorite Settings Name] and click [Apply - Epson ColorWorks C7500 | Technical Reference Guide - Page 108
Initialize printer Initializes the printer. Initialize Item Factory reset Erase memory Description Initializes the printer to the factory settings. Initializes the extended memory. 108 - Epson ColorWorks C7500 | Technical Reference Guide - Page 109
information. Chapter 3 Handling 3 Item Printer information Printer settings list Maintenance counters Description When [View...] is clicked, the settings information of the current printer is displayed. Refer to "Printer settings list" on page 110. The maintenance counters can be checked. 109 - Epson ColorWorks C7500 | Technical Reference Guide - Page 110
Printer settings list When [View...] of the printer settings list is clicked, the "Printer settings list" screen is displayed. Click [Output to file...] to save the current settings to a text file. 110 - Epson ColorWorks C7500 | Technical Reference Guide - Page 111
Settings save and restore Describes how to save and restore settings of the product. Chapter 3 Handling 3 Save settings Item Save data Save to folder File name Start saving Restore settings Backup file File data Start restoring Description Sets the data to be saved. Put a checkmark to the - Epson ColorWorks C7500 | Technical Reference Guide - Page 112
startup. Description Sets the units. Initializes the expanded memory. Unit settings are only for PrinterSetting. They are not reflected on the operation panel or the printer driver. 112 - Epson ColorWorks C7500 | Technical Reference Guide - Page 113
Driver Chapter 3 Handling Favorite Setting [Favorite Setting] is the function to administer print setting of the printer driver into one. [Favorite setting] of the printer driver is different from [Favorite setting] of the product. The two functions are not compatible. It cannot be combined - Epson ColorWorks C7500 | Technical Reference Guide - Page 114
the document is changed. This prevents an error of setting change when changing the paper. (It is necessary to change Media position detection of the printer when the document is changed.) 114 - Epson ColorWorks C7500 | Technical Reference Guide - Page 115
Media (4) Registered to Favorite Setting [Favorite Setting] includes the following setting. Default Settings: The default setting when installing the printer driver. Current Settings: The contents set on [General] and [Option] tab. These contents are displayed in the current settings - Epson ColorWorks C7500 | Technical Reference Guide - Page 116
driver is different from [Favorite setting] of the product. [Favorite setting] of the product cannot be included in the settings file of the printer driver. Export Settings Follow the steps below to export the settings. 1 Check that the print setting has been registered in [Favorite Setting]. If - Epson ColorWorks C7500 | Technical Reference Guide - Page 117
in a BSF file from the current settings. If you export it from the general setting, a different content will be exported. Current settings: Properties of the printer driver-[General]-[Printing References]-[Driver Utilities] -[Import/Export Settings] General setting: 3 Properties of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 118
Import Settings When the settings are imported from a BSF file, the printer driver settings are overwritten. Therefore, to retain the existing settings for the items listed below, create a BSF including the existing settings. Favorite List User Defined - Epson ColorWorks C7500 | Technical Reference Guide - Page 119
Chapter 3 Handling Barcode Printing The printer driver has the built-in barcode font. Barcode printing is available if the barcode is not created on the application side. Setting the barcode font - Epson ColorWorks C7500 | Technical Reference Guide - Page 120
• Hexadecimal Input Mode: Turn on the check box when the data for barcode is specified on Hexadecimal Input Mode. • Module: Sets the thin element width in dots. (For details, see "Recommended value of the module" on page 121.) • Bar Height: Sets the element height with dots. Specified dots - Epson ColorWorks C7500 | Technical Reference Guide - Page 121
value of the module is different depending on the media type, barcode type and printing direction. Paper feed direction Paper feed direction Plain label Fence bar code Ladder bar code Barcode type Code39 Printing Minimum Module [by 600 dpi] direction ANSI Grade C or higher ANSI Grade - Epson ColorWorks C7500 | Technical Reference Guide - Page 122
, use methods such as reducing the data in a bar by 2 pixels and increasing the blank space by 2 pixels (Bar width adjustment). Synthetic label Barcode type Printing direction Minimum Module [by 600 dpi] ANSI Grade C or higher ANSI Grade B or higher Fence 5 6 Code39 Ladder 5 6 Fence - Epson ColorWorks C7500 | Technical Reference Guide - Page 123
Chapter 3 Handling Matte label/ Glossy label Barcode type Printing direction Minimum Module [by 600 dpi] ANSI Grade C or higher ANSI Grade B or higher Fence 5 6 Code39 Ladder 5 6 Fence 5 6 Codabar(NW7) Ladder 5 6 Fence 5 6 - Epson ColorWorks C7500 | Technical Reference Guide - Page 124
to the head. Codabar(NW7) Do not include the start code and stop code into data. The start code and stop code specified in the printer driver screen are added. 124 - Epson ColorWorks C7500 | Technical Reference Guide - Page 125
Chapter 3 Handling Code93 A start code, 2 check digits, stop code is automatically added. A character () that indicates a start code is printed for the head of the HRI character. A character () that indicates a stop code is printed for the end of the HRI character. HRI characters of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 126
A special character is indicated by combining '{' and the next character. Control Character ASCII HRI Character SHIFT {S Not printed. CODE A {A Not printed. CODE B {B Not printed. CODE C {C Not printed. FNC1 {1 Not printed. FNC2 {2 Not printed. FNC3 {3 Not printed. FNC4 - Epson ColorWorks C7500 | Technical Reference Guide - Page 127
Chapter 3 Handling GS1 DataBar Omnidirectional/GS1 DataBar Truncated/GS1 DataBar Limited The first application identifier '01' is not included in the data. When printing the HRI characters, the first application identifier '01' is printed as '(01)' before the packing identification code. A - Epson ColorWorks C7500 | Technical Reference Guide - Page 128
when other values are selected. Some applications, such as the .NET application, may not be able to display or select a barcode font registered by the printer driver. In that case, if you use the font replacement function to replace the True Type font with the barcode font, you can print barcodes - Epson ColorWorks C7500 | Technical Reference Guide - Page 129
Chapter 3 Handling 2D symbol Printing The printer driver has the built-in 2D symbol font. 2D symbol printing is available if the 2D symbol is not created on the application side. Setting - Epson ColorWorks C7500 | Technical Reference Guide - Page 130
2 Make settings of the following items according to the selected [Type]. • PDF417 Module Width: Makes settings of the module width for PDF417. "Recommended value of the module" on page 132 for the recommended value. Module Height: Makes settings of the module height for PDF417 by the ratio to - Epson ColorWorks C7500 | Technical Reference Guide - Page 131
Chapter 3 Handling • GS1 DataBar Module: Sets the module width for GS1 DataBar. "Recommended value of the module" on page 132 for the recommended value. Number of Characters: Sets the maximum width for GS1 DataBar. Set when GS1 DataBar Expanded Stacked is selected for the 2D symbol. • - Epson ColorWorks C7500 | Technical Reference Guide - Page 132
2D symbol type PDF417 MicroPDF417 GS1 DataBar Stacked GS1 DataBar Stacked Omnidirectional GS1 DataBar Expanded Stacked Matte label/ Glossy label 2D symbol type PDF417 MicroPDF417 GS1 DataBar Stacked GS1 DataBar Stacked Omnidirectional GS1 DataBar Expanded Stacked Minimum Module [by 600 dpi] ANSI - Epson ColorWorks C7500 | Technical Reference Guide - Page 133
2D symbol type QR Code Micro QR Code AztecCode DataMatrix Maxi Code Synthetic label 2D symbol type QR Code Micro QR Code AztecCode DataMatrix Maxi Code Matte label/ Glossy label 2D symbol type QR Code Micro QR Code AztecCode DataMatrix Maxi Code Chapter 3 Handling Minimum Module [by 600 dpi - Epson ColorWorks C7500 | Technical Reference Guide - Page 134
Specifying the 2D symbol data See the following description to specify the 2D symbol data. PDF417/MicroPDF417 Calculated automatically when the digit number and the line number are 0. To specify other number than 0, make sure the multiplication of the digit number and the line number is under - Epson ColorWorks C7500 | Technical Reference Guide - Page 135
data in order of a composite symbol and 2D symbol. AztecCode Supports the full range mode and the compact mode. Printing method Specify the not be able to display or select a 2D symbol font registered by the printer driver. In that case, if you use the font replacement function to replace the - Epson ColorWorks C7500 | Technical Reference Guide - Page 136
Barcode and 2D Symbol Font Printing on .NET Environment Since .NET Framework supports only True Type font and Open Type font, the barcode and 2D symbol font which are registered in the printer driver can not be printed from the application. Therefore, True Type font is replaced with barcode and 2D - Epson ColorWorks C7500 | Technical Reference Guide - Page 137
Chapter 3 Handling Printing barcode and 2D symbol Sets specified number of point, language of the replaced True Type font by barcode and 2D symbol font to the print data. The number of point for barcode and 2D symbol is specified, check it from [Barcode and 2D Symbol] on [Driver Utilities]. The - Epson ColorWorks C7500 | Technical Reference Guide - Page 138
of "Banding Reduction" is inappropriate." on page 174. Follow the steps below to reduce banding. 1 Display the printer driver window. See "How to Display the Printer Driver" on page 76 2 On "General" window, select [Advanced] under [Print Settings]. Then click [Advanced...]. 3 "Advanced" screen - Epson ColorWorks C7500 | Technical Reference Guide - Page 139
Start the PrinterSetting from the printer driver with the following steps. 1 Display the printer driver window. See "How to Display the Printer Driver" on page 76 2 Select [Printer Utility] tab. Click [Printer Setting Utility]. Chapter 3 Handling 3 3 The "TM-C7500 Series PrinterSetting" screen is - Epson ColorWorks C7500 | Technical Reference Guide - Page 140
Monitor 3 Settings window in Driver Utilities. Follow the steps below to change to [Use EPSON Status Monitor 3]. 1 Turn the printer ON. 2 Display the printer driver window. See "How to Display the Printer Driver" on page 76 3 Select [Driver Utilities] tab and click [Driver Preferences] under [Driver - Epson ColorWorks C7500 | Technical Reference Guide - Page 141
will be performed: When printing, a window automatically appears, allowing you to check the printer status and the ink level. Error information is displayed when an error occurs during printing. The EPSON Status Monitor 3 will not be activated if an error occurs when not printing. Clicking - Epson ColorWorks C7500 | Technical Reference Guide - Page 142
The following items can be set in [Monitoring preferences]. Selecting error indications: (See "Error notification setting for [Not use EPSON Status Monitor 3]" on page 143) Displaying the [EPSON Status Monitor 3] icon on the task bar: (See "Displaying the icon" on page 145) 142 - Epson ColorWorks C7500 | Technical Reference Guide - Page 143
Not use EPSON Status Monitor 3" on page 140.) 4 The [Notification Settings for Fatal Errors] window is displayed. Select the items you want to display when an error occurs, and click [OK]. 3 Ambient Temperature Error: Service Required: Nozzle Clogged Warning: When the printer temperature is - Epson ColorWorks C7500 | Technical Reference Guide - Page 144
when an error occurs, and click [OK]. Error: Communication Error: Ink Low: Service Required: Nozzle Clogged Warning: When paper/ink replacement is required (Default: Screen Notification [On]) When the printer power is off (Default: Screen Notification [Off]) When the ink amount is low - Epson ColorWorks C7500 | Technical Reference Guide - Page 145
is not displayed when default setting. Follow the steps below to display the icon. 1 Turn the printer ON. 2 Display the printer driver window. See "How to Display the Printer Driver" on page 76 3 Select [Driver Utilities] tab and click [Monitoring Preferences]. 4 The [Monitoring Preferences] window - Epson ColorWorks C7500 | Technical Reference Guide - Page 146
Use by enabling the bi-directional support. Preset image printing cannot be executed with a printer driver. When printing multiple jobs in vary. When using an Epson printer driver, leave the control prefix, format prefix and delimiter settings of ESC/ Label command as default. When changed, - Epson ColorWorks C7500 | Technical Reference Guide - Page 147
and instructions for follows: 1 Print out the printer status sheet and confirm the IP printer. If they are not on the same network, change the computer network settings. 3 If the printer 3 Startup the computer or tablet browser. 4 Enter the printer IP address into the browser address bar. 5 The " - Epson ColorWorks C7500 | Technical Reference Guide - Page 148
Network settings Configure the printer network by the following procedure. 1 Startup EpsonNetConfig. See "How to startup EpsonNetConfig" on page 147. 2 Click [Network Setup] on the "Main" window. 3 The Password input - Epson ColorWorks C7500 | Technical Reference Guide - Page 149
Information] on the "Main" window. 3 The Password input window appears. Enter the password. 4 The "Printer Information" window is displayed. Select the [Information2] tab. Confirm this product network setting. By clicking the [Refresh] button, you can retrieve information. 3 Initialization of - Epson ColorWorks C7500 | Technical Reference Guide - Page 150
procedure. 1 Startup EpsonNetConfig. See "How to startup EpsonNetConfig" on page 147. 2 Click [Printer Information] on the "Main" window. 3 The Password input window appears. Enter the password. 4 The "Printer Information" window is displayed. Confirm the remaining ink quantity in this product. By - Epson ColorWorks C7500 | Technical Reference Guide - Page 151
and settings methods for using Epson printer drivers to perform borderless printing. With borderless printing, the print may extend onto the backing paper (liner) depending on the actual print position and position the paper is loaded. When handling printed paper (labels), take extra care to prevent - Epson ColorWorks C7500 | Technical Reference Guide - Page 152
the black mark, making it necessary to adjust the printing position of the printer. Borderless Printing Settings This section describes the printing methods of borderless printing of the below-indicated label. Label size: Width: 107.0 mm Height: 150.0 mm Settings of the "User Defined Media - Epson ColorWorks C7500 | Technical Reference Guide - Page 153
3 Set the layout information for the die-cut label paper being used. Set the label width and length according to the size of the label. 3 1.5 mm 107 mm 150 mm 1.5 mm 1.5 mm 1.5 mm Print area Label Matrix area BlackMark Position Paper Default settings specify a 1.5 mm - Epson ColorWorks C7500 | Technical Reference Guide - Page 154
4 Put a checkmark in [Borderless Printing]. This enables borderless printing. White Border A slight white border might still remain around the periphery of the label due to an error of the media or printer. Perform from Step 5 and after to remove this border. 154 - Epson ColorWorks C7500 | Technical Reference Guide - Page 155
mm 151 mm Extend the printable area 1 mm on the top, bottom, right and left sides. Printable area shifts to the upper left of the label 155 - Epson ColorWorks C7500 | Technical Reference Guide - Page 156
detail, refer to "Setting panel switch" on page 80. After correcting the printing position of the printer, it will still change when the media layout or label media is changed. 7 Print using media with a gap between labels of 4 mm or more. It may not be possible to continuously print - Epson ColorWorks C7500 | Technical Reference Guide - Page 157
the computer. 2 Select [Start] - [Control Panel] - [Uninstall a program] - [EPSON Printer Driver Utility]. Click [Uninstall/Change]. 3 "EPSON Printer Utility Uninstall" screen appears. Select [Utility] tab. 3 4 Select [USB Replacement Service] and click [OK]. Click [OK] to start uninstallation - Epson ColorWorks C7500 | Technical Reference Guide - Page 158
Restrictions in USB Printer Class Device Replacement Service After the printer is replaced, the green check mark indicating [default printer] in "Devices and Printers" window may be shown on the previous printer that was applied before replacement. Or the check mark may not appear. In these cases, - Epson ColorWorks C7500 | Technical Reference Guide - Page 159
Chapter 3 Handling Setting the Dip Switches Follow the steps below to change the Dip switch settings. Setting Procedure Follow the steps below to change the Dip switch settings. CAUTION Before you remove the DIP switch cover, turn the product off. Otherwise, a short-circuit may cause the - Epson ColorWorks C7500 | Technical Reference Guide - Page 160
Cleaning the autocutter If adhesive matter from the label paper adheres to the autocutter, the autocutter may become blunt. In this case, clean the autocutter with the following steps. 1 Turn the printer power off, and disconnect the AC cable from the wall outlet. 2 Open the roll paper cover and - Epson ColorWorks C7500 | Technical Reference Guide - Page 161
3 Handling Cleaning the Internal Parts (Platen) If labels, paper dust, or adhesive matter adheres to the platen the paper feed slot. 4 Open the front cover. 5 Remove any label material that is attached to the platen. When removing labels, ensure that no adhesive matter remains on any parts. 3 161 - Epson ColorWorks C7500 | Technical Reference Guide - Page 162
matter from the platen with a damp non-woven cloth. Platen WARNING It is not possible to clean around the top surface inside of the printer. The metal wheels on the top surface may deform, preventing it from properly feeding the paper. CAUTION Never clean the product with alcohol, benzine - Epson ColorWorks C7500 | Technical Reference Guide - Page 163
the printer power off, and disconnect the AC cable from the wall outlet. 2 Open the paper set cover. 3 Pull the front cover open lever at the paper feed slot. 4 Open the front cover. 5 Open the paper holds inside the paper set cover and remove the paper. 6 Move the paper guide while holding - Epson ColorWorks C7500 | Technical Reference Guide - Page 164
below. 1 Run a nozzle check print to check that no dot missing or other printing problems have occurred. In case any printing problems have occurred, run manual head cleaning so that the printer recovers from the problem. See "Test printing" on page 74 CAUTION If dot missing has occurred, ink may - Epson ColorWorks C7500 | Technical Reference Guide - Page 165
after long-term storage When restarting the printer after a long-term storage, follow the steps below. 1 CAUTION Do not turn the product off or do not open Ink cartridge cover, Front cover, Rewinder connection cover, Maintenance box cover, or Paper set cover during the head cleaning operation. 3 - Epson ColorWorks C7500 | Technical Reference Guide - Page 166
cover. Do not tilt the product more than 10 degrees in any direction while carrying it. Doing so may cause an accident. When transporting this printer, do not put it upside down or topple over sideways. 166 - Epson ColorWorks C7500 | Technical Reference Guide - Page 167
Troubleshooting Chapter 3 Handling Error Processing LCD display Error Description Recovery method NO specified on "the label printing application" or "the printer driver provided by the label printing application manufacturer" to that is suitable for the loaded paper. For instructions on how to - Epson ColorWorks C7500 | Technical Reference Guide - Page 168
application manufacturer". Set the method of paper supply specified on "the label printing application" or "the printer driver provided by the label printing application manufacturer" to that is suitable for the actual supply. For instructions on how to change the settings, refer to "Media detector - Epson ColorWorks C7500 | Technical Reference Guide - Page 169
with a new one. NON-GENUINE CARTRIDGE MAY NOT PERFORM AT OPTIMUM LEVEL Non-genuine ink Non-genuine ink is mounted. The color of the printer driver of the product is adjusted based on the assumption that genuine ink for the product is used. When ink cartridges other than genuine cartridges - Epson ColorWorks C7500 | Technical Reference Guide - Page 170
D6 to DB) Paper jam Poor autocutter operation Irregular ambient temperature Malfunction The printer will not recover until you perform the proper processing, then turn the power the operation. SERVICE REQUIRED ## (##: F0 to F4) Service required The product is beyond its service life. Malfunction - Epson ColorWorks C7500 | Technical Reference Guide - Page 171
perform head cleaning. Execute manual head cleaning from [Cleaning] on service life. Because the internal parts of the printer are near the end of their service life, prepare to replace the printer, or prepare a printer for replacement. When the status changes to "Service required", the printer - Epson ColorWorks C7500 | Technical Reference Guide - Page 172
in the "Port" setting of the driver properties is disabled. When using an printer driver, enable the "Enable the bi-direction support" in the "Port" setting of the properties. When using a ZPL II compatible printer driver with this product, printing may not be performed. Check whether printing is - Epson ColorWorks C7500 | Technical Reference Guide - Page 173
Recovery method Uneven printed colors "Dot dropouts" are occurring. From the [NOZZLE CHECK] on the unit panel, or from the [Printer Utilities] in the printer driver or PrinterSetting, use the [Manual Head Cleaning] and [Nozzle Check] to check for nozzle clogging. If the nozzle is clogged, execute - Epson ColorWorks C7500 | Technical Reference Guide - Page 174
Fanfold Paper" on page 60 A head cleaning is necessary. When the printer is moved after initial charging, there may be cases that specified colors are not printed out right ("Color mixing") due to vibration or shock. Execute a manual head cleaning and check that the color mixing no longer occurs - Epson ColorWorks C7500 | Technical Reference Guide - Page 175
printer driver. For details, refer to "Position adjustment" on page 94 The paper guide is not set Check the position of the paper guide. manual. "Ink profile" setting is necessary. The amount of ink to maintain the barcode printing quality may vary depending on the media. When using the printer - Epson ColorWorks C7500 | Technical Reference Guide - Page 176
attached to the head. sary. Perform a manual head cleaning. Dirt inside the printer State The ink stain has occurred. Cause printer driver may be different. If the setting is for full-page label, do not use die-cut label. Ink discharge on the base paper can lead to staining and other troubles - Epson ColorWorks C7500 | Technical Reference Guide - Page 177
the media used may be different. the status becomes error. used are different. Check "Media Detection Settings" of the printer and the media used. 3 In case of "Media form" is die-cut label For details, refer to "Paper settings" on page 67 (blackmark), full-page The blackmark is out of When - Epson ColorWorks C7500 | Technical Reference Guide - Page 178
is waiting for data from the computer. The printing area overlaps the 3 mm gap between label pages. The printing area overlaps the 3 mm gap between label pages. Recovery method On the printer driver Properties window, click the "Advanced" tab and try the "Spool print documents so program finishes - Epson ColorWorks C7500 | Technical Reference Guide - Page 179
Chapter 3 Handling Paper is jammed Do not forcibly pull out paper that is jammed but rather remove it by following the steps below. 1 Make sure that the product is powered off. 2 Open the paper set cover. 3 3 Pull the front cover open lever at the paper feed slot. Front Cover Open Lever 179 - Epson ColorWorks C7500 | Technical Reference Guide - Page 180
4 Open the front cover. 5 Cut the jammed paper and remove it. WARNING Do not touch the metal wheels. Doing so may cause injury. 180 - Epson ColorWorks C7500 | Technical Reference Guide - Page 181
fingers may get dirty. CAUTION Chapter 3 Handling 6 Pull out the paper from the paper feed slot. 3 7 Confirm that there are no labels or adhesive matter inside the printer. See "Cleaning the Internal Parts (Platen)" on page 161 8 Close the front cover. 9 Set the paper again. See "Setting the - Epson ColorWorks C7500 | Technical Reference Guide - Page 182
182 - Epson ColorWorks C7500 | Technical Reference Guide - Page 183
Printer driver. in Chapter 2. page 113 Print from the customer's application developed referring to the Epson Inkjet Label Printer SDK. Uses the Epson Inkjet Label Printer application, and the Epson printer driver is not used. The following label printing applications are supported. BarTender - Epson ColorWorks C7500 | Technical Reference Guide - Page 184
. The following items are included. Items included Description Epson Inkjet Label Printer SDK User's Guide This explains the configuration overview of the Epson Inkjet Label Printer SDK, necessary functions to control Epson Inkjet label printers from an application, and settings that need to be - Epson ColorWorks C7500 | Technical Reference Guide - Page 185
if you printed a color background onto a pre-printed label paper in monochrome, perform settings using the following procedure. an IP address identical to that of the printer before replacing. Setting with the PrinterSetting Setting the printer resolution and monochrome print mode Set to monochrome - Epson ColorWorks C7500 | Technical Reference Guide - Page 186
USB connection, use USBInformationSetting to overwrite the USB ID of the printer before replacing. Perform the following procedure. 1 From the [Start] menu, select [Epson], then [TM-C7500 Series], and click [USBInformationSetting]. 2 USBInformationSetting starts up. Set the replacement method, then - Epson ColorWorks C7500 | Technical Reference Guide - Page 187
now and the computer used for settings via USB, and turn on the printer's computer. Click [Next]. 4 The information of the printer you have been using until now is acquired. Before connecting this printer, unplug the printer you have been using until now. 5 Connect the computer used for settings to - Epson ColorWorks C7500 | Technical Reference Guide - Page 188
Preset Images Use the PrinterSetting to register preset images. Registering images Set the images to be used in preset printing. See "Store data in the printer" on page 97. Setting preset images Set the preset images. For the setting method, see "Preset image" on page 99. Printing Print in your - Epson ColorWorks C7500 | Technical Reference Guide - Page 189
using ZPL II commands" window and adjust the font width. For the method to display the "Replace settings from printer using ZPL II commands" window, see "Replace settings from printer using ZPL II commands" on page 105. If you want to change the height of characters or the space between lines - Epson ColorWorks C7500 | Technical Reference Guide - Page 190
are provided for application development. Software Software TM-C7500 Series PrinterSetting EpsonNet Config Epson Monitoring Tool USB Printer Class Device Replacement Service Color Tone Matching Assistant Description Manual Providing method Utility to setup the product in Windows base. For - Epson ColorWorks C7500 | Technical Reference Guide - Page 191
the Maintenance box. Maintenance box with the rewinder TU-RC7508 User's manual Describes cautionary items and the installation procedure Included with the for the rewinder. rewinder TM-C7500 Series / TM-C7500G Series Technical Reference Guide This document. Describes all information necessary - Epson ColorWorks C7500 | Technical Reference Guide - Page 192
You can use the CD-ROM that comes with the product to install the following software. Printer driver Printer setting utility (PrinterSetting) USB Replacement Service EpsonNet Config Software installation procedures Install the software using the following steps. 1 Turn on the computer - Epson ColorWorks C7500 | Technical Reference Guide - Page 193
See "How to Display the Printer Driver" on page 76 4 Execute [Add a printer] and add the product following the instructions on the screen. In the printer driver installation screen that is displayed during the procedure, select "Epson" as the manufacturer and "EPSON TM-C7500" as the printer. 4 193 - Epson ColorWorks C7500 | Technical Reference Guide - Page 194
194 - Epson ColorWorks C7500 | Technical Reference Guide - Page 195
" on page 199 for details) Media type Media form TM-C7500 TM-C7500G Media source Ink cartridge (See "Ink Cartridge" on label, Matte label, Synthetic label Plain label, Matte label, Synthetic label, Glossy label Full-page label (Black mark/ No Black Mark), Die-cut label (Gap) Die-cut label - Epson ColorWorks C7500 | Technical Reference Guide - Page 196
Temperatures/ humidity (See "Paper Specifications" on page 199 for details.) Printing Storage Overall dimensions (H x W x D) Weight (mass) 5 to 35 °C {41 to 95 °F}, 20 to 80 %RH (no condensation) When packed (ink not loaded): -20 to 60 C {-4 to 140 F}, 5 to 85 %RH (no condensation) -20 C or 60 - Epson ColorWorks C7500 | Technical Reference Guide - Page 197
32 bit/ 64 bit) Microsoft Windows Server 2003 R2 (32 bit) Must support the following computers that run the above operating systems. PC/AT compatible 2 GHz or better processor is recommended. Intel Pentium/ Celeron series or AMD Athlon/ Duron family processor, or processor interchangeable with - Epson ColorWorks C7500 | Technical Reference Guide - Page 198
Printing Specifications Printable Area Roll paper Fanfold paper Minimum 46 mm {1.81"}, Maximum 108 mm {4.25"} Minimum 46 mm {1.81"}, Maximum 108 mm {4.25"} Printing speed During printing Head maintenance mode Continuous Printing Pause for Maintenance (Intermittent printing) Input resolution *1 - Epson ColorWorks C7500 | Technical Reference Guide - Page 199
and the size of paper specified for this printer. When using paper not in the paper C7500 Media form Media type Media source Width Full-page label (Black mark/ No Black Mark) Plain label Matte label Synthetic label Roll paper Die-cut label (Gap) Plain label Matte label Synthetic label - Epson ColorWorks C7500 | Technical Reference Guide - Page 200
) 46 to 108 mm {1.81 to 4.25"} (Label width) Media type Plain label Matte label Synthetic label Glossy label Media source Roll paper Plain label Matte label Synthetic label Glossy label Roll paper Plain label Matte label Synthetic label Glossy label Roll paper Fanfold paper Width 50 to 112 mm - Epson ColorWorks C7500 | Technical Reference Guide - Page 201
or more Gaps between black marks * 28.4 to 603 mm {1.12 to 23.74"} Paper thickness Plain label/ matte label/ synthetic label: 0.129 to 0.236 mm {0.005 to 0.009"} (reference values) Glossy label: 0.167 to 0.182 mm {0.007 to 0.007"} (reference values) Paper core Internal diameter: 76.2 0.5 mm - Epson ColorWorks C7500 | Technical Reference Guide - Page 202
area Media type Media source Backing paper width Label width Label length Gap between labels Left and right outer edges Label edge R Paper thickness Paper core External diameter Winding direction Plain label / Matte label / Synthetic label / Glossy label Roll paper 50 to 112 mm {1.97 to 4.41"} 46 - Epson ColorWorks C7500 | Technical Reference Guide - Page 203
Mark) When removing all the fringes Backing paper width Edge R Appendix Gap between Label length labels Edge cutoff Label width Black mark position Edge cutoff Backing paper Label area Paper feed direction Mark length Gaps between Black marks Perforated line - Epson ColorWorks C7500 | Technical Reference Guide - Page 204
edge R Width of a black mark Length of a black mark Gaps between black marks Paper thickness Paper core External diameter Winding direction Plain label/ Matte label/ Synthetic label/ Glossy label Roll paper 50 to 112 mm {1.97 to 4.41"} 46 to 108 mm {1.81 to 4.25"} 25.4 to 600 mm {1 to 23.62"} 3 to - Epson ColorWorks C7500 | Technical Reference Guide - Page 205
line may cause problems when feeding paper. Therefore, autocutting must be performed 0.5 to 1 mm {0.02 to 0.039"} behind the perforated line. Therefore, set the black mark position 2 mm {0.08"} or more from the perforation. For the black mark position of the die-cut label paper, match the - Epson ColorWorks C7500 | Technical Reference Guide - Page 206
black marks, the light transmission rates must be: 40 % or higher for the backing paper, and 23 % or lower for the labels. When using paper with black marks, the black mark reflectance rate must be 10 % or lower, and the white reflectance rate is 70 % or higher. - Epson ColorWorks C7500 | Technical Reference Guide - Page 207
} Print area width 1.5 mm {0.06"} Outer edge (Removed) 2.0 mm {0.08"} Print area Label area Paper Black mark position The distance from the paper cut position to the black mark leading edge is less than 1.5 mm {0.06"}, the printer may be unable to print pages because it fails to sense their black marks - Epson ColorWorks C7500 | Technical Reference Guide - Page 208
the paper/ label. To make sure printing doesn't protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data. The distance from the paper cut position to the black mark leading edge must be at least 1.5 mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable - Epson ColorWorks C7500 | Technical Reference Guide - Page 209
mm {0.06"} 1.5 mm {0.06" } Outer edge (Removed) 2.0 mm { 0.08" } Print area width 1.5 mm {0.06"} Outer edge (Removed) 2.0 mm { 0.08" } Print area Label area Paper A 4mm margin * will be added to the front of the label in the following cases. The 4mm margin will not be added to the front of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 210
in the following cases. The 4mm margin will not be added to the front of the label from the second page onwards. First label page following Auto-cut. First label page after turning power on. If "Borderless Printing" is enabled, it is possible that the printing will protrude depending on the - Epson ColorWorks C7500 | Technical Reference Guide - Page 211
Vertical margins: 1.5 mm {0.06"} (Typical value) Lateral margins: 1.5 mm {0.06"} (Typical value) Perforated line Auto-cut position Paper width Interval between labels 3.0 mm {0.12"} Auto-cut position 0.5 to 1 mm {0.02 to 0.04" } 1.5 mm {0.06"} 1.5 mm {0.06"} 22.4 mm {0.88"} or more 25.4 mm - Epson ColorWorks C7500 | Technical Reference Guide - Page 212
width 0.5 to 1 mm {0.02 to 0.04" } 1.5 mm {0.06"} Paper feeding direction 25.4 mm {1.0" } or more 28.4 mm {1.12"} or more Interval between labels 3.0 mm {0.12"} Auto-cut position 1.5 mm {0.06"} Outer edge (Removed) 2.0 mm { 0.08" } Print area width Outer edge (Removed) 2.0 mm {0.08"} Print - Epson ColorWorks C7500 | Technical Reference Guide - Page 213
} Print area width 1.5 mm {0.06"} Outer edge (Removed) 2.0 mm {0.08"} Print area Label area Paper Black mark position The distance from the paper cut position to the black mark leading edge is less than 1.5 mm {0.06"}, the printer may be unable to print pages because it fails to sense their black marks - Epson ColorWorks C7500 | Technical Reference Guide - Page 214
the paper/ label. To make sure printing doesn't protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data. The distance from the paper cut position to the black mark leading edge must be at least 1.5 mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable - Epson ColorWorks C7500 | Technical Reference Guide - Page 215
area width 1.5 mm { 0.06"} Outer edge (Removed) 2.0 mm {0.08"} Print area Label area Paper Black mark position The distance from the paper cut position to the black mark mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages because it fails to sense their black - Epson ColorWorks C7500 | Technical Reference Guide - Page 216
the paper/ label. To make sure printing doesn't protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data. The distance from the paper cut position to the black mark leading edge must be at least 1.5 mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable - Epson ColorWorks C7500 | Technical Reference Guide - Page 217
230 V: Average Approximately 5.1 W Approximately 5.4 W When power is 100 V: Average OFF 230 V: Average Approximately 0.2 W Approximately 0.5 W *: The operating power consumption is based on Epson operating conditions. Use the dedicated AC cable included in the product package. Appendix 217 - Epson ColorWorks C7500 | Technical Reference Guide - Page 218
-C7500G Autocutter mechanism TM-C7500 TM-C7500G 12 billion shots/nozzle Die-cut label (Plain): 500 km Die-cut label (Matte): 500 km Die-cut label (Synthetic): 500 km Full-page label (Plain): 500 km Full-page label (Matte): 500 km Full-page label (Synthetic): 500 km Die-cut label (Plain): 500 km - Epson ColorWorks C7500 | Technical Reference Guide - Page 219
Hz Acceleration: Approximately 19.6 m/s2 {2 G} Sweep: 10 minutes (half cycle) Time: 1 hour Orientation: x, y, and z Shock resistance When packed Packing: Epson standard package specifications Height: 45 cm {17.72"} Orientation: 1 corner, 3 edges, and 6 surfaces When unpacked Height: 5 cm {1.97 - Epson ColorWorks C7500 | Technical Reference Guide - Page 220
External Dimensions Main unit outline drawings Width: 392 mm {15.43"} Depth: 598 mm {23.54"} Height: 395 mm {15.55"} 392 {15.43"} 21.7 {0.85"} 638 {25.12"} 598 {23.54"} 220 395 {15.55"} [Unit: mm] - Epson ColorWorks C7500 | Technical Reference Guide - Page 221
When Covers are Open 691.2 {27.21"} Appendix 717.6 {28.25"} 632.5 {24.90"} [Unit: mm] 221 - Epson ColorWorks C7500 | Technical Reference Guide - Page 222
When Rewinder is Installed (Option: TU-RC7508) 900 {35.43"} 958 {37.72"} 222 [Unit: mm] - Epson ColorWorks C7500 | Technical Reference Guide - Page 223
Type Ink color Ink type Ink life Temperatures TM-C7500 TM-C7510 TM-C7520 TM-C7500G TM-C7510G TM- color-ink separated exclusive ink cartridge Black, Cyan, magenta, yellow Pigment ink 6 months after loading to the printer, 2 years after manufacturing -20 to 60 C {-4 to 140 F} (up to 5 days for 60 - Epson ColorWorks C7500 | Technical Reference Guide - Page 224
Option Specifications Rewinder (TU-RC7508) The rewinder is a device used to rewind the printed paper into a roll form. Overall dimensions (H x W x D) 293 x 222 x 403 mm {11.54 x 8.74 x 15.87"} Weight (mass) 4.25 kg {9.37 lb} 224 - Epson ColorWorks C7500 | Technical Reference Guide - Page 225
Appendix LCD Display Specifications for the Number of Printed Copies The number of printed copies is displayed on the LCD by the number of printed copies (the number of printed copies in the jobs) and the total number of printed copies (total number of the jobs printed). The number of the printed - Epson ColorWorks C7500 | Technical Reference Guide - Page 226
Drivers, Utilities, and Manuals Printer drivers, utilities, and manuals can be downloaded from one of the following URLs: For customers in North America, go to the following web site: www.epson.com/support/ For customers in other countries, go to the following web site: www.epson-biz.com/ 226 - Epson ColorWorks C7500 | Technical Reference Guide - Page 227
, a media detector error or a paper path error will occur and printing will not be possible. Here are the instructions for configuring the following label printing application. Changing the media detector settings in BarTender: page 228 Changing the paper path settings in BarTender - Epson ColorWorks C7500 | Technical Reference Guide - Page 228
Changing the media detector settings in BarTender You can change the media detector settings in BarTender by following the steps below. 1 Open a BarTender document (*.btw). Select [Page Setup...] in the [File] menu. 2 The "Page Setup" window appears. Select the [Media Handling] tab, and click [ - Epson ColorWorks C7500 | Technical Reference Guide - Page 229
Appendix 3 The "Epson Colorworks C7500 Printing Preferences" window appears. Select the [Stock] tab. Change [Media Type] in [Media Settings] and click [OK]. Driver Media Type Gap Die-cut Label Mark Die-cut Label Mark Continuous Paper Mark Continuous Label Settings of the corresponding operation - Epson ColorWorks C7500 | Technical Reference Guide - Page 230
in the [File] menu. 2 The "Page Setup" window appears. Select the [Media Handling] tab, and click [Driver Settings...]. 3 The "Epson Colorworks C7500 Printing Preferences" window appears. Select the [Stock] tab and click [Advanced] under [Media Type]. 4 The "Advanced Media Settings" window appears - Epson ColorWorks C7500 | Technical Reference Guide - Page 231
detector settings in NiceLabel by following the steps below. 1 Open a NiceLabel label (*.lab). Select [Label Setup...] in the [File] menu. 2 The "Label Setup Wizard" window or the "Label Setup" window appears. Select "Epson TM-C7500 for NiceLabel" and click [Properties...]. If you check the [Do not - Epson ColorWorks C7500 | Technical Reference Guide - Page 232
3 The "Epson TM-C7500 for NiceLabel Printing Preferences" window appears. Change [Media type] in [Page Setup] and click [OK]. Driver Media type Labels with black mark Labels with gaps Continuous label with mark Continuous paper with black mark Continuous labels Continuous paper Settings of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 233
the steps below. 1 Open a NiceLabel label (*.lab). Select [Label Setup...] in the [File] menu. 2 The "Label Setup Wizard" window or the "Label Setup" window appears. Select "Epson TM-C7500 for NiceLabel" and click [Properties...]. 3 The "Epson TM-C7500 for NiceLabel Printing Preferences" window - Epson ColorWorks C7500 | Technical Reference Guide - Page 234
CODESOFT Change the media detector settings in CODESOFT by following the steps below. 1 Open a label file (*.lab). Select [Label/Page Setup...] in the [File] menu. 2 The "Label/Page Setup" window appears. Select [Label]. Change [Media] and click [OK]. Driver With gap Marked Media Settings of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 235
path settings in CODESOFT by following the steps below. 1 Open a label file (*.lab). Select [Label/Page Setup...] in the [File] menu. 2 The "Label/Page Setup" window appears. Click [Settings...]. Appendix 3 The "Printer settings - EPSON TM-C7500" window appears. Change [Media source] and click [OK - Epson ColorWorks C7500 | Technical Reference Guide - Page 236
Changing the media detector settings in Loftware Spectrum You can change the media detector settings in Loftware Spectrum by following the steps below. 1 Click [ (Device Management)] - [Media], and change [Edge Detection]. Loftware Spectrum Edge Detection Black Mark Gap None Settings of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 237
Changing the paper path settings in Loftware Spectrum You can change the paper path settings in Loftware Spectrum by following the steps below. 1 Click [ (Device Management)] - [Media], and change [Source]. Appendix Loftware Spectrum Source Internal Roll External Feed Settings of the - Epson ColorWorks C7500 | Technical Reference Guide - Page 238
on. The following is the display example of the [Design] screen. The screen for step 2 can be displayed in the following way. [Design] - [Media Setup] - [Label Setup] - [Configure Devices] 2 Click [Options...]. 238 - Epson ColorWorks C7500 | Technical Reference Guide - Page 239
Edge Detectior Gap Black Mark None Don't Send Settings of the corresponding operation panels MEDIA DETECT GAP BLACK MARK NONE (This does not change the printer settings.) The screen for step 3 can be displayed in the following way. [Device Wizard] - [Step1] - [Options] 239 - Epson ColorWorks C7500 | Technical Reference Guide - Page 240
on. The following is the display example of the [Design] screen. The screen for step 2 can be displayed in the following way. [Design] - [Media Setup] - [Label Setup] - [Configure Devices] 2 Click [Options...]. 240 - Epson ColorWorks C7500 | Technical Reference Guide - Page 241
3 Click [Advanced Settings]. Appendix 4 Change [Source], and then click [OK]. Loftware Print Server Source Don't Send External Feed Internal Roll Settings of the corresponding operation panels MEDIA SOURCE (This does not change the printer settings.) EXTERNAL FEED INTERNAL ROLL 241 - Epson ColorWorks C7500 | Technical Reference Guide - Page 242
information: • Windows service operation / Normal EXE operation ❏ EPSON application status: EpsonNet WebManager / EpsonNet Log Browser / Epson Monitoring Tool/ EpsonNet Simple Viewer / EpsonNet SDK for Windows / Printer Setting / Other (Application name) ❏ Phenomenon of the problem (or content
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
 |
 |
Describes how to handle the product.
Describes setup and installation of the product and peripherals.
Describes how to control the printer and necessary information
when you develop applications.
Describes general speciļ¬cations and character code tables.
Describes features for the product.
Technical Reference Guide
Series
Series
/
M00079112
Rev. M
Product Overview
Setup
Handling
Application Development Information
Appendix