Denon AVR-2802 Owners Manual - Page 6
Connecting the antenna terminals - screen
View all Denon AVR-2802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ENGLISH Connecting a Video Component Equipped with Color Difference (Component - Y, PR/CR, PB/CB) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks. • The AVR-2802's on-screen display signals are not output from the color difference (component) video output jacks (MONITOR OUT). • Some video sources with component video outputs are labeled Y, CB, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video color difference output. COMPONENT VIDEO OUT CR CB Y DVD player B COMPONENT VIDEO IN Y CB CR Monitor TV Connecting a DVD player DVD IN jacks • Connect the DVD player's color difference (component) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω/ohms coaxial video pin-plug cords. • In the same way, another video source with component video outputs such as a TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component) video jacks. Connecting a monitor TV MONITOR OUT jack • Connect the TV's color difference (component) video input jacks (COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT jack using 75 Ω/ohms coaxial video pin-plug cords. • The color difference input jacks may be indicated differently on some TVs, monitors or video components ("CR, CB and Y", "R-Y, B-Y and Y", "Pr, Pb and Y", etc.). For details, carefully read the operating instructions included with the TV or other component. Connecting the antenna terminals DIRECTION OF BROADCASTING STATION FM ANTENNA 75 Ω/ohms COAXIAL CABLE FM INDOOR ANTENNA (Supplied) GROUND AM loop antenna assembly Connect to the AM antenna terminals. 1 2 3 Remove the vinyl tie and take out the Bend in the reverse 4 connection line. direction. a. With the antenna on top any stable surface. Mount b. With the antenna attached to a wall. Installation hole Mount on wall, etc. AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA Connection of AM antennas 1. Push the lever. 2. Insert the 3. Return the conductor. lever. Notes: • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure AM loop antenna lead terminals do not touch metal parts of the panel. 6