Dell E525w Color Multifunction Printer - Users Guide - Page 95
Clean Developer, Adjust Altitude, Reset Defaults, and Restart Printer
View all Dell E525w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Values: Auto Correct Color Registration Adjustment 1 (Lateral) Color Registration Adjustment 2 (Process) Click Start to perform color registration adjustment. Specifies lateral (perpendicular to paper feed direction) color adjustment values individually for Y (Yellow), M (Magenta), C (Cyan) within the range of -5 to +5. Specifies process (paper feed direction) color adjustment values individually for LY (Left Yellow), LM (Left Magenta), LC (Left Cyan), RY (Right Yellow), RM (Right Magenta), and RC (Right Cyan) within the range of -5 to +5. Clean Developer Purpose: To rotate the developer motor and stir the toner in the toner cartridge, to use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in a new toner cartridge. Values: Clean Developer Yellow Toner Refresh Magenta Toner Refresh Cyan Toner Refresh Black Toner Refresh Click Start to stir the toner in the toner cartridge. Click Start to clean the toner in the yellow toner cartridge. Click Start to clean the toner in the magenta toner cartridge. Click Start to clean the toner in the cyan toner cartridge. Click Start to clean the toner in the black toner cartridge. Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed. The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the location where the printer is being used. NOTE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Values: 0 meter* 1000 meters 2000 meters 3000 meters Specifies the altitude of the location where the printer is installed. Reset Defaults Purpose: To initialize NVM (non-volatile memory) memory for system parameters and Address Book data. After executing this function and rebooting the printer, the menu parameters or data are reset to their default values. Values: Reset Defaults User Fax Section and Restart Printer Reset Defaults User Scan Section and Restart Printer Reset Defaults System Section and Restart Printer Click Start to initialize the system parameters. Click Start to initialize the fax number entries in the Address Book. Click Start to initialize the e-mail and server address entries in the Address Book. Dell™ Printer Configuration Web Tool 95