Dell E525w Color Multifunction Printer - Users Guide - Page 30

NOTE: Connect the Ethernet cable only when you need to setup a wired connection. Wireless Connection Following are the specifications for a wireless setup: Item Specification Connectivity Wireless Connectivity standard IEEE 802.11b/g/n compliant Bandwidth 2.4 GHz Data transfer rate IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11n mode: 65 Mbps Security 64 (40-bit key)/128 (104-bit key) WEP, WPA-PSK (AES), WPA2-PSK (AES)(IEEE 802.1x attestation function of WPA 1x non-corresponds), Mixed Mode PSK Wi-Fi Protected Setup®(WPS)*1 Push Button Configuration (PBC), Personal Identification Number (PIN) *1 WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed Mode PSK, WPA-PSK AES, WPA2-PSK AES, Open (No Security) You can select a method to configure a wireless setting from the following: WPS-PBC (Wi-Fi | WPS Button)*1 WPS-PBC (Operator Panel Menu)*1 WPS-PIN*2 Auto SSID Setup Manual SSID Setup *1 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless configuration, by starting WPS-PBC on the printer with the (Wi-Fi | WPS) button or operator panel menu, and then pressing the button provided on the wireless LAN access point (Registrar) or router. This setting is available only when the access point supports WPS-PBC. *2 WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wireless configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is available only when the access points of your wireless router supports WPS. NOTE: Connecting to the network via Ethernet cable disables wireless setting. 30 Connecting Your Printer