Dell E525w Color Multifunction Printer - Users Guide - Page 43
Setting the IP Address, Assigning an IP Address, Operator Panel
View all Dell E525w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
7 Setting the IP Address Assigning an IP Address An IP address is a unique number that consists of four sections that are delimited by a period and can include up to three digits in each section, for example, 192.0.2.1. You can select the IP mode from Dual Stack and IPv4 Mode. If your network supports both the IPv4 and IPv6 mode, select Dual Stack. CAUTION: Assigning an IP address that is already in use can cause network performance issues. NOTE: Assigning an IP address is considered as an advanced function and is normally done by a system administrator. NOTE: When you assign an IP address manually in the IPv6 mode, use the Dell™ Printer Configuration Web Tool. To open the Dell Printer Configuration Web Tool, use the link local address. To check a link local address, see "Verifying the IP Address" on page 45. NOTE: Depending on the address class, the range of the IP address assigned may be different. On Class A, for example, an IP address in the range from 0.0.0.0 to 127.255.255.255 will be assigned. For assignment of IP addresses, contact your system administrator. You can assign the IP address by using the operator panel or using the Tool Box. The following procedure describes how to assign an IP address manually as an example. Operator Panel For more information on using your operator panel, see "Operator Panel" on page 70. NOTE: A password is required to enter Admin Menu when Panel Lock Set is set to Enable. In this case, enter the password you specified, and press the (Set) button. 1 Press the (Menu) button. 2 Press the button until System is highlighted, and then press the (Set) button. 3 Press the button until Admin Menu is highlighted, and then press the (Set) button. 4 Press the button until Network is highlighted, and then press the (Set) button. 5 Press the button until TCP/IP is highlighted, and then press the (Set) button. 6 Press the button until IPv4 Ethernet is highlighted, and then press the (Set) button. 7 Ensure that Get IP Address is highlighted, and then press the (Set) button. 8 Press the button until Panel is highlighted, and then press the (Set) button. 9 Press the button and ensure that Get IP Address is highlighted. 10 Press the button until IP Address is highlighted, and then press the (Set) button. The cursor is located at the first three digits of the IP address. 11 Enter the value of the IP address using the numeric keypad. 12 Press the button. The next three digits are highlighted. 13 Repeat step 11 and step 12 to enter all of the digits in the IP address, and then press the (Set) button. 14 Press the button and ensure that IP Address is highlighted. 15 Press the button until Subnet Mask is highlighted, and then press the The cursor is located at the first three digits of the subnet mask. (Set) button. Setting the IP Address 43