Dell E525w Color Multifunction Printer - Users Guide - Page 103
Edit SNMP v3 Properties, Trap Notification IP Port
View all Dell E525w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Trap Notification 1-4 Community Name (Trap) Sets the community name used for trap up to 31 alphanumeric characters. The original setting will remain valid if no input is made. Characters entered for Community Name (Trap) in the previous settings will not be displayed on the screen. The default Trap Community is " " (NULL). Re-enter Community Name Enters the community name used for trap again to confirm it. (Trap) Trap Address Type Trap Address Trap Notification (IP) Port Number Notify Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in the following format: IPv4 Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a variable value between 0 and 255. Note that values 127 and 224254 are not valid for the first three-digits only. IP socket mmmmm is a variable value between 0 and 65535. IPv6 Specify the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value between 0 and 65535. Authenticate Error Trap Select the check box to notify authentication error trapping. SNMP v3 Purpose: To edit the detailed settings of SNMP v3 protocol. To enter this page, click Edit SNMP v3 Properties in the SNMP page. Values: Administrator Account Print Drivers / Remote Client Account Account Enabled User Name Authentication Password (8 - 32 Bytes) Confirm Authentication Password (8 - 32 Bytes) Privacy Password (8 - 32 Bytes) Account Enabled Reset to default Password Select the check box to enable the administrator account. Enters the user name of the administrator account. Sets the authentication password of the administrator account using 8 to 32 alphanumeric characters. Confirms the set password. Sets the privacy password of the administrator account using 8 to 32 alphanumeric characters. Select the check box to enable the print drivers and remote client account. Click to reset the password for the print drivers and remote client account to default. Dell™ Printer Configuration Web Tool 103