Dell E525w Color Multifunction Printer - Users Guide - Page 86
USB Settings, Out of Paper Tone
View all Dell E525w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Panel Alert Tone Sets the volume of the tone that is emitted when the operator panel input is incorrect, or disables the tone. Job Tone Sets the volume of the tone that is emitted when a job is complete, or disables the tone. Alert Tone Sets the volume of the tone that is emitted when a problem occurs, or disables the tone. Out of Paper Tone Sets the volume of the tone that is emitted when the printer runs out of paper, or disables the tone. Auto Clear Alert Tone Sets the volume of the tone that is emitted 5 seconds before the printer performs auto clear, or disables the tone. All Tones Sets the volume of all the alert tones, or disables all the tones. Job Time-Out Specifies the amount of time that the printer waits for data to arrive from the computer. The print job is canceled if it times out. Panel Language Used to set the language on the operator panel. Disable printing with larger Specifies whether to print jobs if the paper set in the tray of the printer is larger than the paper paper size*2 size set in the printer driver (the paper size does not have to match). Auto Log Print mm/inch*3 Specifies if a job history needs to be printed after every 20 jobs. Specifies the measurement unit displayed after the numeric value on the operator panel. *1 Enter 5 in Power Saver Timer - Sleep to put the printer in the power saver timer mode 5 minutes after it finishes a job. This uses less energy, but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 5 and 30 minutes for the power saver timer mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver timer mode when it receives data from the computer. You can also return the printer to the standby mode by pressing any button on the operator panel. *2 Available only in the Dell Printer Configuration Web Tool and the Tool Box. *3 The default varies depending on country-specific factory default. USB Settings Purpose: To change USB settings on your printer. Values: Port Status PS Data Format Enables the USB interface on your printer. Sets PostScript 3 Compatible communication protocol for each interface. PCL Settings Purpose: To change the PCL settings. Values: Paper Size Orientation Font Symbol Set Font Size Font Pitch Form Line Quantity Sets the paper size. Sets how text and graphics are oriented on the page. Sets the font from the list of registered fonts. Sets a symbol set for the specified font. Sets the font size for scalable typographic fonts. Sets the font pitch for scalable mono spaced fonts. Sets the number of lines in a page. Sets the number of copies to print. 86 Dell™ Printer Configuration Web Tool