Dell E525w Color Multifunction Printer - Users Guide - Page 297

Auger Mark, Wrinkled/Stained Paper, Clean, Developer, Tool Box, Printer, Maintenance, Start

Page 297 highlights

Auger Mark Action 1 The toner cartridges may be low or need to be replaced. a Check if the LCD panel on the operator panel shows the message prompting you to replace a toner cartridge. b Replace the toner cartridges as necessary. Is the problem recovered? 2 Start Clean Developer. a Launch the Tool Box, and click Clean Developer on the Printer Maintenance tab. b Click Start. Is the problem recovered? Wrinkled/Stained Paper Yes The task is complete. No Go to action 2. The task is complete. Contact Dell. Action Yes 1 Remove the stack of paper from the standard 150 sheet tray, rotate it The task is complete. 180 degrees, and then reload it in the tray. 2 Verify that the correct print media is being used. See "Supported Paper The task is complete. Sizes" on page 166 and "Print Media Guidelines" on page 162. If not, use the print media recommended for the printer. Is the problem recovered? No Go to action 2. If printing on an envelope, go to action 3. If printing on print media other than envelopes, contact Dell. Troubleshooting 297

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314

Troubleshooting
297
Auger Mark
Wrinkled/Stained Paper
Action
Yes
No
1
The toner cartridges may be low or need to be replaced.
a
Check if the LCD panel on the operator panel shows the message
prompting you to replace a toner cartridge.
b
Replace the toner cartridges as necessary.
Is the problem recovered?
The task is complete.
Go to action 2.
2
Start
Clean
Developer
.
a
Launch the
Tool Box
, and click
Clean
Developer
on the
Printer
Maintenance
tab.
b
Click
Start
.
Is the problem recovered?
The task is complete.
Contact Dell.
Action
Yes
No
1
Remove the stack of paper from the standard 150 sheet tray, rotate it
180 degrees, and then reload it in the tray.
The task is complete.
Go to action 2.
2
Verify that the correct print media is being used. See "Supported Paper
Sizes" on page 166 and "Print Media Guidelines" on page 162. If not, use
the print media recommended for the printer.
Is the problem recovered?
The task is complete.
If printing on an
envelope, go to action
3.
If printing on print
media other than
envelopes, contact Dell.