Dell E525w Color Multifunction Printer - Users Guide - Page 142
Fax Settings, No. n/Address, n is 1-5., No. n/Mask, Reject, Accept, Standard
View all Dell E525w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Values: No. n/Address (n is 1-5.) No. n/Mask (n is 1-5.) No. n/Mode (n is 1-5.) Reject Accept Off* Sets the IP address for Filter n. Sets the address mask for Filter n. Rejects an access from the specified IP address. Accepts an access from the specified IP address. Disables the feature for Filter n. NOTE: This item is only available for LPD or Port9100. Initialize NVM Purpose: To initialize network data stored in NVM (non-volatile memory). After executing this function and rebooting the printer, all network settings are reset to their default values. Values: Yes Initializes network data stored in NVM. No* Does not initialize network data stored in NVM. PS Data Format Purpose: To specify the PostScript 3 Compatible communication protocol. You can configure the PS Data Format settings for the wired network. Values: Auto* Standard BCP TBCP Sets the PostScript 3 Compatible communications protocol automatically. Sets the PostScript 3 Compatible communications protocol to Standard. Sets the PostScript 3 Compatible communications protocol to BCP. Sets the PostScript 3 Compatible communications protocol to TBCP. Wi-Fi Purpose: To enable the wireless connection. Values: Off Disables the wireless connection. On* Enables the wireless connection. NOTE: This item is available only when the Ethernet cable is disconnected. NOTE: When you use the USB connection and do not use the wireless connection, you need to disable the wireless LAN. Fax Settings Use this menu to configure the basic fax settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. 142 Understanding the Printer Menus