Dell E525w Color Multifunction Printer - Users Guide - Page 291
Print Quality Problems, The Output Is Too Light
View all Dell E525w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Print Quality Problems NOTE: In this section, some procedures that use the Tool Box can also be performed using the operator panel or Dell Printer Configuration Web Tool. For information on how to use the operator panel and Dell Printer Configuration Web Tool, see "Understanding the Printer Menus" on page 117 and "Dell™ Printer Configuration Web Tool" on page 75. The Output Is Too Light Action Yes 1 If you use non-Dell brand toner cartridges, install Dell brand toner cartridges. The task is complete. Is the problem recovered? 2 The toner cartridges may be low or need to be replaced. The task is complete. a Check if the LCD panel on the operator panel shows the message prompting you to replace a toner cartridge. b Replace the toner cartridges as necessary. Is the problem recovered? 3 Verify that the print media is not damp and the correct print media is The task is complete. used. See "Supported Paper Types" on page 167. If not, use the print media recommended for the printer. Is the problem recovered? 4 Verify that the Paper Type setting in the printer driver matches the print The task is complete. media you loaded. a On the General or Paper/Output tab in Printing Preferences of the printer driver, check the Paper Type setting. b Load dry (not damp) and corrected print media, and then click Print Test Page in Printer properties of the printer driver. Is the problem recovered? 5 Disable the Toner Saving Mode in the printer driver. The task is complete. a On the Graphics tab in Printing Preferences of the printer driver, ensure that the Toner Saving Mode check box is not selected. Is the problem recovered? No Go to action 2. Go to action 3. Go to action 4. Go to action 5. Contact Dell. Troubleshooting 291