2011 Kawasaki KX250F Owners Manual - Page 68
2011 Kawasaki KX250F Manual
Page 68 highlights
66 MAINTENANCE AND ADJUSTMENT • Remove the friction and steel plates. Steel Plate Thickness Measurement Standard Service Limit 1.5 ~ 1.7 mm (0.059 ~ 0.067 in.) 1.4 mm (0.055 in.) A. Friction Plate B. Steel Plate inspect the friction and steel plates to see • Visually if they show any signs of seizure, or uneven wear. any plates show signs of damage, replace all • If friction plates and steel plates as a set. the thickness of the friction and steel • Measure plates with vernier calipers. they have worn past the service limit, replace • If them with new ones. Friction Plate Thickness Measurement Standard Service Limit 2.72 ~ 2.88 mm (0.107 ~ 0.113 in.) 2.5 mm (0.10 in.) Friction and Steel Plates Wear/Damage Inspection A. Thickness B. Friction Plate each friction plate and steel plate on a sur• Place face plate, and measure the amount of friction plate and steel plate warp with a thickness gauge (i.e., the gap between the surface plate and each friction plate or steel plate). If any plate is warped over the service limit, replace it with a new one. Friction and Steel Plate Warp Inspection •