2011 Kawasaki KX250F Owners Manual - Page 64
2011 Kawasaki KX250F Manual
Page 64 highlights
62 MAINTENANCE AND ADJUSTMENT the intake air pressure sensor connector, • Connect fuel injector connector and throttle sensor connecTightening Torque Rear Frame Mounting Bolts: 34 N·m (3.5 kgf·m, 25 ft·lb) the removed parts. • Install Open and close the throttle a few times to make • sure the grip operates correctly. Check the throttle cable play and idle speed ad• justment. • • • tor. Install the rear frame with the air cleaner housing to the throttle body assy. Check the duct is installed securely. Check the clamp position as shown in the figure. A. Clamp • Tighten the clamp screws securely. Tightening Torque Throttle Body Assy Holder Clamp Screw: 2.0 N·m (0.20 kgf·m, 18 in·lb) Air Cleaner Duct Clamp Screw: 2.0 N·m (0.20 kgf·m, 18 in·lb) the rear • Tighten specified torque. frame mounting bolts to the