2011 Kawasaki KX250F Owners Manual - Page 135
2011 Kawasaki KX250F Manual
Page 135 highlights
MAINTENANCE AND ADJUSTMENT 133 wrench is fitted, and that of the octagonal hole of the wrench. ○ This torque value (31 N·m (3.1 kgf·m, 23 ft·lb)) is applicable when you use a torque wrench whose length gives leverage of approximately 310 mm (12.2 in.) between the grip point to the center of the coupling square. a non-permanent locking agent to the front • Apply fork clamp bolts (upper). the front fork clamp bolts (upper) to the • Tighten specified torque. Tightening Torque A. Left Front Fork Cylinder Unit B. Top Plug Wrench (Special Tool: 57001-1645) C. Torque Wrench Front Fork Clamp Bolts (Upper): 23 N·m (2.3 kgf·m, 17 ft·lb) Tightening Torque Left Front Fork Cylinder Unit: 34 N·m (3.5 kgf·m, 25 ft·lb) Right Front Fork Top Plug: 34 N·m (3.5 kgf·m, 25 ft·lb) NOTE ○ The torque of left front fork cylinder unit and right front fork top plug are specified to 34 N·m (3.5 kgf·m, 25 ft·lb) however, when you use the top plug wrench (special tool: 57001-1645), reduce the torque to 90% of the specified value (31 N·m (3.1 kgf·m, 23 ft·lb)) due to the distance between the center of the square hole, where the torque A. Top Plug Wrench (Special Tool: 57001-1645) B. Distance