2010 Kawasaki MULE 4010 Trans4x4 Diesel Owners Manual - Page 98

2010 Kawasaki MULE 4010 Trans4x4 Diesel Manual

Page 98 highlights

96 MAINTENANCE AND ADJUSTMENT j A. Transmission Case B. Oil Filler Plug A. Dipstick B. "H" (High) Line C. "L" (Low) Line NOTICE Be careful not to allow any dirt or foreign materials to enter the transmission case. out the dipstick and check the oil level. The • Pull oil level should be between the "H" (High) and "L" (Low) lines on the dipstick. the oil level is too high, remove the excess oil, • If using a syringe or other suitable device, through • • the oil filler opening. If the oil level is too low, add the correct amount of oil. Install the filler plug. żUse the same type and brand of oil that is already in the transmission case. NOTE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151

96
MAINTENANCE AND ADJUSTMENT
j
A. Transmission Case
B. Oil Filler Plug
NOTICE
Be careful not to allow any dirt or foreign ma-
terials to enter the transmission case.
Pull out the dipstick and check the oil level. The
oil level should be between the “H” (High) and “L”
(Low) lines on the dipstick.
A. Dipstick
B. “H” (High) Line
C. “L” (Low) Line
If the oil level is too high, remove the excess oil,
using a syringe or other suitable device, through
the oil filler opening.
If the oil level is too low, add the correct amount of
oil.
Install the filler plug.
NOTE
ż
Use the same type and brand of oil that is already
in the transmission case.