2010 Kawasaki MULE 4010 Trans4x4 Diesel Owners Manual - Page 90
2010 Kawasaki MULE 4010 Trans4x4 Diesel Manual
Page 90 highlights
88 MAINTENANCE AND ADJUSTMENT j A. Rear Seat (Folded) B. Dipstick out the dipstick and check the oil level. The • Pull oil level should be between the F (full) and L (low) holes on the dipstick. A. Dipstick B. F (Full) Hole C. L (Low) Hole the oil level is too high, remove the excess oil, • If using a tube type syringe or other suitable device NOTICE To avoid the engine damage, do not fill the engine oil above the full level. • • • through the dipstick tube. If the oil level is too low, unscrew the oil filler cap and add slowly the correct amount of oil. Use the same type and brand of oil that is already in the engine. Install the filler cap & dipstick. żInsert dipstick into tube holding its tip as far as possible so that it will not bend. NOTE Oil and/or Oil Filter Change When changing or adding oil, use the chart on page 92 to select the correct viscosity grade for the temperature expected. Warm up the engine thoroughly, and then stop the engine.