2010 Kawasaki MULE 4010 Trans4x4 Diesel Owners Manual - Page 68
2010 Kawasaki MULE 4010 Trans4x4 Diesel Manual
Page 68 highlights
66 HOW TO OPERATE Reversing Gears j the throttle pedal, and stop the vehicle. • Release you want to operate the vehicle in reverse, • When stop the vehicle completely, allowing the engine to slow to idling speed, and move the gear shift lever to the "R" (Reverse) position. 2WD-4WD Shifting the stopper under the 2WD-4WD shift lever • Pull knob and while holding it against the knob, move • NOTICE Do not shift from "H" (High) or "L" (Low) to "R" (Reverse) and vice versa when the vehicle is moving or with the engine running above idling speed, or the transmission could be damaged. the shift lever to the all way down "4WD". To shift back into "2WD" position, pull and hold the stopper, then move the shift lever all the way up "2WD". żWhen NOTE the shift lever is moved from "2WD" to "4WD", the transmission shifts immediately. When the shift lever is moved from "4WD" to "2WD", the transmission may not shift all the way into "2WD" until the vehicle has rolled a short distance. żWhen the shift lever is moved into the "R" (Re- NOTE verse) position, the reverse light at the rear end goes on.