2010 Kawasaki MULE 4010 Trans4x4 Diesel Owners Manual - Page 113

MAINTENANCE AND ADJUSTMENT 111 a suitable container under the fuel filter to • Place catch spilled fuel. the drain cap at the bottom end of the fuel • Remove filter. Discard the O-ring. the fuel filter element with a filter wrench. • Remove Replace old filter element with a new one. • Tighten it the by hand until the gasket on the element it 1/3 turn more to obtain a snug fit. • Tighten Replace old O-ring with a new one. Tighten • the drain the cap securely. the air vent plug. Operate the priming • Loosen pump several times until fuel flows out. the air vent plug. • Tighten Thoroughly wipe up any spilled fuel. • Crank the engine and check for fuel leaks around • the filter. touches the filter body. j A. Drain Cap B. Drain Tube the drain cap and operate the priming • Tighten pump until fuel flows from the air vent plug. • Tighten the air vent plug securely. Tightening Torque Air Vent Plug: 4.9 N·m (0.50 kgf·m, 43 in·lb) wipe up any spilled fuel. • Thoroughly the engine and check for fuel leaks around • Crank the filter. Replacement of Fuel Filter Element • Stop the engine.