2010 Kawasaki MULE 4010 Trans4x4 Diesel Owners Manual - Page 97
2010 Kawasaki MULE 4010 Trans4x4 Diesel Manual
Page 97 highlights
MAINTENANCE AND ADJUSTMENT 95 WARNING Oil on tires can make them slippery which can cause an accident and injury. When draining or filling the gear case, be careful that no oil gets on the tires or rims. Clean off any oil that inadvertently gets on them with soap and water. the oil has completely drained out, install the • After drain plug with new gasket. Tightening Torque Drain Plug: 20 N·m (2.0 kgf·m, 14.0 ft·lb) the gear case up to the bottom thread of the • Fill filler opening with a good quality oil as specified in the table. Front Final Gear Case Oil Oil Capacity about 400 mL (0.4 US qt) Oil Type API "GL-5" or API "GL-6" Hypoid gear oil for Limited Slip Differentials, SAE 85W-140, SAE90 or SAE140 Transmission Case Oil In order for the transmission, differential, pinion, and ring gears to function properly, check the oil level and change the oil in accordance with the Periodic Maintenance Chart. WARNING Vehicle operation with insufficient, deteriorated, or contaminated oil causes accelerated wear of the transmission, differential, pinion, and ring gears and may result in seizure. Seizure can lock the rear wheels and skid the rear tires, with consequent loss of control, accident, and injury. Check the oil level and change the oil according to the owner's manual. j Oil Level Inspection the vehicle on level ground. • Park the cargo bed and support it with the rod. • Lift the oil filler plug, wipe its dipstick dry, and • Unscrew insert it into the filler hole but DO NOT SCREW IT IN. • Install the filler cap and gear case guard.