2005 Ducati Superbike 749R Owners Manual - Page 160

Chain tension inspection (fig. 65) Important Have the drive chain tensioned up at a Ducati Dealer or Authorized Workshop. With the motorcycle on the side stand, use your finger to press down the chain. Then release and measure the distance between the surface of the shoe and the pivot centre below. The reading should be 30-35 mm. Warning Correct tightening of the tensioner lock nuts (1) is essential to rider's safety. Important Improper chain tension will lead to early wear of transmission parts. Important Using non-specific lubricants may lead to severe damage to chain, front and rear sprocket. E 1 Chain lubrication The chain fitted on your motorcycle has O-rings that keep dirt out of and lubricant inside the sliding parts. The seals might be irreparably damaged if the chain is cleaned using any solvent other than those specific for O-ring chains or washed using steam or water jets. After cleaning, blow the chain dry or dry it using absorbent material and lubricate with SHELL Advance Chain or Advance Teflon Chain on each link. 30 ÷ 35 mm fig. 65 67