2005 Ducati Superbike 749R Owners Manual - Page 126

Gearchange pedal adjustment (fig. 26) Gear change pedal position relative to the footpeg may be adjusted to suit rider preferences. There are three different adjustments available: Approximate adjustment of pedal position Fit a wrench into the socket (1) to lock out removable linkage rotation and slacken the locknut (3). Release and remove the screw (2) and adjust the linkage axially so as to set the gear change pedal in the desired position. The linkage has four positions determined by the axis of the screw (2). After adjustment, torque screw (2) to 8 Nm and locknut (3) to 10 Nm. Fine adjustment Fit a wrench into the socket (1) to lock out removable linkage rotation and slacken the locknut (3). Rotate the linkage working the socket (1) so as to set pedal in the desired position. When finished, torque locknut (3) to 10 Nm. Combined adjustment Both adjustment techniques may be used together. Make sure to torque locknut (3) to 10 Nm and screw (2) to 8 Nm when finished. 2 E 1 3 fig. 26 33