Netgear XCM89UP User Manual Software Version 11.x - Page 691

M6100, M5300, and M7100 Series Managed Switches 6. Click the Login button. The web management interface menu displays. 7. Select Monitoring > Logs > Command Log Configuration. 8. Use Admin Mode to enable/disable the operation of the CLI command logging by selecting the corresponding radio button. Enable or Disable Console Logging This allows logging to any serial device attached to the host.  To enable or disable console logging: 1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for example, 169.254.100.201. 2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on the switch. 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. The Login screen displays. 5. Enter the user name and password. The default admin user name is admin and the default admin password is blank, that is, do not enter a password. 6. Click the Login button. The web management interface menu displays. 7. Select Monitoring > Logs > Console Log Configuration. 8. Select the Admin Status Disable or Enable radio button. A log that is disabled does not log messages. Monitor the System 691