Netgear XCM89UP User Manual Software Version 11.x - Page 166

M6100, M5300, and M7100 Series Managed Switches Configure the Power Auto-Rebalance  To configure the power auto-rebalance: 1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for example, 169.254.100.201. 2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on the switch. 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. The Login screen displays. 5. Enter the user name and password. The default admin user name is admin and the default admin password is blank, that is, do not enter a password. 6. Click the Login button. The web management interface menu displays. 7. Select System > Chassis > Advanced > Chassis Power Configuration. 8. In the Power Auto-rebalance field, specify whether power auto-rebalance mode is Enabled or Disabled. 9. Click the Apply button. Power is applied in auto-rebalance mode. When enabled, the system automatically shuts down low priority ports to power up higher priority ports, even if they were spread across different blades on the chassis. Chassis and Stacking 166