Netgear XCM89UP User Manual Software Version 11.x - Page 489

M6100, M5300, and M7100 Series Managed Switches To refresh the screen with the latest information on the switch, click the Update button. The following table describes the nonconfigurable data that is displayed. Table 187. Multicast Mroute Table Field Group IP Source IP Incoming Interface Outgoing Interfaces Up Time (hh:mm:ss) Expiry Time (hh:mm:ss) RPF Neighbor Protocol Flags Description The destination group IP address. The IP address of the multicast packet source to be combined with the group IP to fully identify a single route whose Mroute table entry. The incoming interface on which multicast packets for this source/group arrive. The list of outgoing interfaces on which multicast packets for this source/group are forwarded. The time in seconds since the entry was created. The time in seconds before this entry ages out and is removed from the table. The IP address of the reverse path forwarding (RPF) neighbor. The multicast routing protocol which created this entry. The possible values are as follows: • PIM-DM • PIM-SM The value displayed in this field is valid if the multicast routing protocol running is PIM-SM. The possible values are RPT or SPT. For other protocols a - (hyphen) is displayed. Configure the IPv6 PIM Global Settings  To configure the IPv6 PIM global settings: 1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for example, 169.254.100.201. 2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on the switch. 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. Multicast Routing 489