Netgear XCM89UP User Manual Software Version 11.x - Page 623

M6100, M5300, and M7100 Series Managed Switches Table 225. IP Source Guard Dynamic Binding Configuration (continued) Field IP Address Filter Type Description Displays valid IP address for the binding entry. Filter type used on the interface. One is source IP address filter type, and the other is source IP address and MAC address filter type. Configure IPv6 Source Guard Interface Settings  To configure IPv6 source guard Interface settings: 1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for example, 169.254.100.201. 2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on the switch. 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. The Login screen displays. 5. Enter the user name and password. The default admin user name is admin and the default admin password is blank, that is, do not enter a password. 6. Click the Login button. The web management interface menu displays. 7. Select Security > Control > IPv6 Source Guard > Interface Configuration. 8. Use Interface to select the interface. 9. Use IPv6SG Mode to enable or disable validation of sender IPv6 address on this interface. If IPv6SG is enabled, packets are not forwarded if the sender IPv6 address is not in the DHCP snooping binding database. The factory default is Disable. 10. Use IPv6SG Port Security to enable or disable the IPv6SG port security on the selected interface. Manage Device Security 623