Netgear XCM89UP User Manual Software Version 11.x - Page 146

M6100, M5300, and M7100 Series Managed Switches The web management interface menu displays. 7. Select System > ISDP > Advanced > Global Configuration. 8. Select the Admin mode Disable or Enable radio button. This specifies whether the ISDP Service is enabled or disabled. The default value is Enable. 9. In the Timer field, specify the period of time between sending new ISDP packets. The range is 5 to 254 seconds. The default value is 30 seconds. 10. In the Hold Time field, specify the hold time for ISDP packets that the switch transmits. The hold time specifies how long a receiving device must store information sent in the ISDP packet before discarding it. The range 10 to 255 seconds. The default value is 180 seconds. 11. Select the Version 2 Advertisements Disable or Enable radio button. This enables or disables the sending of ISDP version 2 packets from the device. The default value is Enable. The following table describes the ISDP Advanced Global Configuration fields. Table 52. ISDP Advanced Global Configuration Field Description Neighbors table last time changed Displays when the Neighbors table last changed. Device ID The device ID of this switch. Device ID Format Capability The device ID format capability. Device ID Format The device ID format. Configure System Information 146