Netgear XCM89UP User Manual Software Version 11.x - Page 643

M6100, M5300, and M7100 Series Managed Switches The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure the Captive Portal Trap Flag Settings You can specify whether or not SNMP traps are sent from the captive portal and to specify captive portal events that generate a trap. All CP SNMP traps are disabled be default.  To configure the captive portal trap flag settings: 1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for example, 169.254.100.201. 2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on the switch. 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. The Login screen displays. 5. Enter the user name and password. The default admin user name is admin and the default admin password is blank, that is, do not enter a password. 6. Click the Login button. The web management interface menu displays. 7. Select Security > Control > Captive Portal > CP Trap Flags. 8. Select the CP Trap Mode Disable or Enable radio button. This sets the option to enable or disable the captive portal trap mode. 9. Select the Client Authentication Failure Disable or Enable radio button. If you enable this, the SNMP agent sends a trap when a client attempts to authenticate with a captive portal but is unsuccessful. 10. Select the Client Connect Disable or Enable radio button.. Manage Device Security 643