Netgear XCM89UP User Manual Software Version 11.x - Page 429

M6100, M5300, and M7100 Series Managed Switches 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. The Login screen displays. 5. Enter the user name and password. The default admin user name is admin and the default admin password is blank, that is, do not enter a password. 6. Click the Login button. The web management interface menu displays. 7. Select Routing > OSPFv3 > Advanced > Stub Area Configuration. 8. In the Area ID field, enter the OSPF area ID. An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to which a router interface connects. 9. In the Import Summary LSAs list, select the Enable or Disable option. If you select Enable, summary LSAs are imported into areas. The default is Enable. 10. In the Default Cost field, enter the metric value to be applied for the default route advertised into the stub area. The valid values range from 1 to 16,777,215. This value is applicable only to stub areas. 11. Click the Add button. The area is configured as a stub area. 12. To delete the stub area designation, click the Delete button. The area is returned to normal state. 13. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. OSPF and OSPFv3 429