Netgear XCM89UP User Manual Software Version 11.x - Page 324

M6100, M5300, and M7100 Series Managed Switches  To specify route preferences 1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for example, 169.254.100.201. 2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on the switch. 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. The Login screen displays. 5. Enter the user name and password. The default admin user name is admin and the default admin password is blank, that is, do not enter a password. 6. Click the Login button. The web management interface menu displays. 7. Select Routing> Routing Table > Advanced > Route Preferences. 8. Use Static to specify the static route preference value in the router. The default value is 1. The range is 1 to 255. 9. Specify the RIP route preference value in the router. The default value is 120. The range is 1 to 255. 10. Specify the OSPF Intra route preference value in the router. The default value is 110. The range is 1 to 255. The OSPF specification (RFC 2328) requires that preferences must be given to the routes learned through OSPF in the following order: intra < inter < type-1 < type-2. 11. Specify the OSPF Inter route preference value in the router. The default value is 110. The range is 1 to 255. The OSPF specification (RFC 2328) requires that preferences must be given to the routes learned through OSPF in the following order: intra < inter < type-1 < type-2. 12. Specify the OSPF External route preference value in the router. Routing 324