Netgear XCM89UP User Manual Software Version 11.x - Page 365

M6100, M5300, and M7100 Series Managed Switches Table 136. ARP Cache (continued) Field Port MAC Address Type Age Description The associated unit/slot/port of the connection. The unicast MAC address of the device. The address is six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40. The type of ARP entry. Possible values are as follows: • Local. An ARP entry associated with one of the switch's routing interface's MAC addresses. • Gateway. A dynamic ARP entry whose IP address is that of a router. • Static. An ARP entry configured by the user. • Dynamic. An ARP entry that was learned by the router. Age since the entry was last refreshed in the ARP table (in seconds). View or Configure the ARP Table You can change the configuration parameters for the Address Resolution Protocol (ARP) table. You can also use this screen to display the contents of the table.  To configure the ARP rable: 1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for example, 169.254.100.201. 2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on the switch. 3. Launch a web browser. 4. Enter the IP address of the switch in the web browser address field. The default IP address of the switch is 169.254.100.100. The Login screen displays. 5. Enter the user name and password. The default admin user name is admin and the default admin password is blank, that is, do not enter a password. 6. Click the Login button. The web management interface menu displays. 7. Select Routing> ARP > Advanced > ARP Table Configuration. Routing 365