Netgear MS510TXPP User Manual - Page 324

Smart Managed Pro Switches MS510TX and MS510TXPP If you do not know the IP address of the switch, see Access the Switch on page 14. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Maintenance > File Management > Dual Image Configuration. The Dual Image Configuration page displays. 6. From the Image Name menu, select the image that is not the image displayed in the Current-active field. The Current-active field displays the name of the active image. 7. To specify a name for the selected image, enter one in the Image Description field. 8. Select the Activate Image check box. 9. Click the Apply button. Your settings are saved. Note: After activating an image, you must perform a system reboot of the switch to run the new image. The switch continues running the image shown in the Current-active field until the switch reboots. 10. To refresh the page with the latest information about the switch, click the Refresh button. View the Dual Image Status The Dual Image Status page shows information about the active and backup images on the system. To view dual image status information: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the Switch on page 14. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. Maintain the Switch and Perform 324 Troubleshooting User Manual